Decreasing the diameter of cycles
نویسنده
چکیده
Alon, Gyárfás and Ruszinkó [1] established a bound for the minimum number of edges that have to be added to a graph of n ≥ n0 vertices in order to obtain a graph of diameter 2. Alon et al. approximated n0 by a polynomial function of the maximum degree of the initial graph. They conjectured that the minimum value for n0 is 12 for the case of Cn, as opposed to n0 = 274 obtained by calculations for the general case. In this paper we prove their conjecture. For the reduction to diameter 3 of a cycle we also improve the bounds from [1] showing that the minimum number of edges that need to be added to the cycle Cn is between n− 59 and n− 8.
منابع مشابه
The Effect of Lateral Loading Parameters on Monopile Behavior Based on Physical Modeling
Monopiles are the most common type of foundation for offshore wind turbines (OWT). Monopiles have been used in more than 80% of the offshore wind turbines. A monopile will be affected by millions of lateral load cycles during the operating period, which will cause its rotation and lateral deformation. The rotation and the deformation are dependent on the soil properties, monopile specification,...
متن کاملOpen-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites
Degradation is a common problem for polymer matrix composites (PMCs) under low thermal cycling conditions. This paper investigates the effects of low thermal cycling on total mass loss (TML) and surface degradation of PMCs. Unnotched and open-hole specimens were weighed before and after low thermal cycling. The total mass loss and surface degradation of the specimens were studied over 250 cycle...
متن کاملA generalization of zero-divisor graphs
In this paper, we introduce a family of graphs which is a generalization of zero-divisor graphs and compute an upper-bound for the diameter of such graphs. We also investigate their cycles and cores
متن کاملThe Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux
One of the major industry problems is the flow boiling, where reaching to the critical heat flux (CHF) condition can lead to a temperature jump and damage of the systems. In the present study, the effects of a uniform change in tube diameter on subcooled flow boiling and CHF was numerically investigated. The Euler-Euler model was used to investigate the relationship between the two liquid and v...
متن کاملP-227: The Survey on Endometrial Thickness and Echo Pattern Changes in Consecutive Cycles of Clomiphene Citrate Therapy in Infertile Women
Background: One of the most common causes of infertility in women is ovulatory dysfunction (PCOS) and the choice of treatment is clomiphene citrate. One of the mechanism of dichotomy between the rate of ovulation and pregnancy is anti estrogenic effects of clomiphene citrate on endometrium. According to its long half life, the anti estrogenic effects probably exacerbate in consecutive cycles. W...
متن کاملEvaluation of anticorrosion behavior of automotive electrocoating primers by the AC-DC-AC accelerated test method
A protective coating has been applied onto the phosphated panels using cathodic electrocoating in two different dry film thickness namely 8µm and 20µm. The corrosion resistance of cathodic electrocoatings has been studied using AC/DC/AC method. Twelve cycles of AC/DC/AC test were carried out on each sample which the DC voltage of the first 6 cycles were -4 V VS. Ag/AgCl @ 20 minutes followed by...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of Graph Theory
دوره 43 شماره
صفحات -
تاریخ انتشار 2003