CMOS Realization of the Operational Mirror Amplifier
نویسنده
چکیده
The design of a CMOS operational mirrored amplifier (OMA) suitable for high frequency applications is proposed. The CMOS operational mirrored amplifier is developed using class AB operational amplifier and two current mirrors. To obtain a wide bandwidth and high stability, HF feedforward techniques have been used. These techniques made the proposed circuit suitable for continuous – time analog signal processing. Simulation results for the proposed CMOS operational mirror amplifier circuit using PSpice are presented. Also, a performance comparison with pervious realization using BJT is given. Key-Words: Operational mirror amplifier, Nullor, Nullator, Darlington pair, CMOS, operational floating amplifier.
منابع مشابه
High-Performance CMOS Current Mirrors: Application to Linear Voltage-to-Current Converter Used for Two-Stage Operational Amplifier
This paper presents two schemes of high performance CMOS current mirror, one of them is used for operational transconductance amplifier (OTA) in analog VLSI systems. The linearity, output impedance, bandwidth and accuracy are the most parameters to determine the performance of the current mirror. Here a comparison of two architectures based on same architecture of the amplifier is presented. Th...
متن کاملODAY the trend of scaling down channel length in CMOS technology to facilitate submicrometer high density systems on a single integrated circuit (IC) and emergence of portable devices like Ambulatory Brain Computer Interface
The increasing demand of personal health monitoring products with long battery life had forced designers to use of those circuits which consume low power. Operational Transconductance Amplifier (OTA) operating in subthreshold (weak inversion) region introduces a versatile solution for the realization of low power VLSI building blocks. This paper is focused on design of high performance OTA thro...
متن کاملA 0.8-V 0.25-mW Current-Mirror OTA With 160-MHz GBW in 0.18-μm CMOS
A low-voltage low-power CMOS operational transconductance amplifier (OTA) with near rail-to-rail output swing is presented in this brief. The proposed circuit is based on the current-mirror OTA topology. In addition, several circuit techniques are adopted to enhance the voltage gain. Simulated from a 0.8-V supply voltage, the proposed OTA achieves a 62-dB dc gain and a gain–bandwidth product of...
متن کاملDesign of a Current Mirror Based Differential Amplifier for Low-voltage and Low Power Applications
As per the Moore’s law, there is an extreme increase in number of on chip devices, this increase in chip density results in power dissipation and thus the power utilization is unsatisfactory. So to avoid this problem the concept of Low Power system arises. As a part of microelectronics, it has been proposed to make the choice of minute circuit with attraction added by use of MOS cells. Since we...
متن کاملA Novel Design of Low Voltage,Wilson Current Mirror based Wideband Operational Transconductance Amplifier
An optimum OTA topology is done in order to optimize MOS transistor sizing.Also, the design of folded cascode OTA, which works for frequencies that lead to a base band circuit design for RF application, is based on transistor sizing methodology. Simulation results are performed using SPICE software and BSIM3V3 model for CMOS 0.18μm process, show that the designed folded cascode OTA has a 52dB D...
متن کامل