The application of automated image analysis to dense heterogeneities in partially sintered alumina
نویسندگان
چکیده
his study used quantitative image analysis to examine the effect of powder forming method on a population of dense heterogeneities that could e imaged in partially sintered alumina using optical microscopy. Powder pressing resulted in a higher area fraction of dense heterogeneities than lip casting. Extreme value analysis was used to predict the size of the largest heterogeneity in the populations and assess the processing methods. owder pressing resulted in the largest extreme value estimate. The results are interpreted in terms of the effect of the forming method on particle acking and the possible effect of the dense heterogeneities on mechanical strength. 2006 Elsevier Ltd. All rights reserved.
منابع مشابه
Infiltration of Porous Zircon Preforms With Alumina Precursor (TECHNICAL NOTE)
A process is described which involves infiltration of aluminum nitrate into partially sintered (porous) zircon bodies. Infiltration kinetics were studied using infiltration curves with two distinct regions. The final infiltrated samples were sintered at 1600 °C for 2 h and yielded specimens containing the tetragonal zirconia.The experimental results show that in spite of the similar porosity of...
متن کاملA Semi-Automated Algorithm for Segmentation of the Left Atrial Appendage Landing Zone: Application in Left Atrial Appendage Occlusion Procedures
Background: Mechanical occlusion of the Left atrial appendage (LAA) using a purpose-built device has emerged as an effective prophylactic treatment in patients with atrial fibrillation at risk of stroke and a contraindication for anticoagulation. A crucial step in procedural planning is the choice of the device size. This is currently based on the manual analysis of the “Device Landing Zone” fr...
متن کاملGelcasting as a Novel Processing Route to Fabricate Partially Stabilized Zirconia Ceramic Bodies
Bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. Partially stabilized zirconia ceramics (PSZ or TZP with 3 mol.% or 5 wt.% Y2O3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. In order to fabricate complex shapes, it is essential to use a near ...
متن کاملI-1: Screening of Subfertile Men for Testicularlar Carcinoma In Situ by An Automated Image Analysis-Based Cytological Test of The Ejaculate
Background: Testicular cancer (TC) is usually diagnosed after manifestation of an overt tumour. Tumour formation is preceded by a pre-invasive and asymptomatic stage, carcinoma in situ (CIS) testis, except for very rare subtypes. The CIS cells are located within seminiferous tubules but can be exfoliated and detected in ejaculates with specific CIS markers. Materials and Methods: We have built ...
متن کاملThe Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite
Alumina-Mullite-Zirconia ceramic composites were prepared by reaction sintering of alumina, zircon mixture and the sintering aids of magnesia and titania at temperatures of 1400 and 1600 C for 2 hours. The development of different phases and microstructures of the composites were analysed to assess the relative influence of the additives on the formation of alumina-zirconia-mullite compos...
متن کامل