Experimental Investigation of Thermally Induced Interacting Cracks in Brittle Solids

نویسندگان

  • F.
  • S. NEMAT - NASSER
چکیده

AbstracbThe results of an experimental investigation of thermally induced parallel edge cracks in a half-plane consisting of brittle material are reported. A free edge of a glass plate heated to a uniform temperature, was brought in contact with a liquid bath cooled by dry ice. The thermal contraction of the boundary layer produced interacting tension cracks. When no initial cracks existed, a large amount of potential energy was released in the formation of a few cracks which extended in a dynamic manner beyond the thermal layer. To prevent this type of cracking, initial cracks were formed before thermally inducing crack growth. This resulted in stable crack growth which qualitatively agreed well with the previously developed theory. The quantitative comparison was also reasonably good.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode

Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...

متن کامل

Experimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode

Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...

متن کامل

Schematic models for fragmentation of brittle solids in one and two dimensions

Stochastic models for the development of cracks in 1 and 2 dimensional objects are presented. In one dimension, we focus on particular scenarios for interacting and non-interacting fragments during the breakup process. For two dimensional objects, we consider only non-interacting fragments, but analyze isotropic and anisotropic development of fissures. Analytical results are given for many obse...

متن کامل

An investigation into finding the optimum combination for dental restorations

The aim of the study was to find the optimum combination of materials and thicknesses to provide a tough, damage resistant multi-layer system with numerical methods to restore the damaged teeth. Extended Finite Element Method (XFEM) was used to assess the critical loads for the onset of damage modes such as radial cracks and plastic deformation in dental prostheses, which consist of a brittle o...

متن کامل

Interaction of dynamic mode-I cracks with inclined interfaces

In this paper, we report on an experimental study of the deflection/penetration behavior of dynamic mode-I cracks propagating at two different crack velocities (slower and faster) toward inclined weak interfaces of three dissimilar angles (a): 30 , 45 and 60 . A simple wedge-loading specimen configuration as proposed by Xu et al. [Xu LR, Huang YY, Rosakis AJ. Dynamic crack deflection and penetr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002