Photon production at the interaction point of the ILC
نویسنده
چکیده
The intense beam-beam effect at the interaction point of the International Linear Collider (ILC) causes large disruption of the beams and the production of photons. These photons, arising dominantly through beamstrahlung emission, are problematic for the machine design as they need to be transported and dumped in a controlled way. In this work, we perform simulations of the beam-beam interaction to predict photon production rates and distributions for the different beam parameters considered at ILC. The results are expressed in terms of a set of cones of excluded power, allowing to define the beam-stay-clear requirements relevant for different cases and contexts. A comparison is also made with theoretical expectations. The suggested photon cone half-opening angles are 0.75 and 0.85 mrad in the horizontal and vertical planes, respectively. These cones cover all machine energies and parameter sets, and include the low power Compton photons.
منابع مشابه
محاسبه میزان دز پرتوهای ترمزی ناشی از الکترون ها در پرتو درمانی با الکترون در بیمارستان آیت ا...خوانساری اراک
During the radiation therapy with electron beam, due to electron interaction and scattering from structures of the head of the medical linear accelerator, unwanted photons are produced. The main contribution of the photon contamination is resulted from the various components of the medical linear accelerator on the way of the high energy electron beam, and few percent is due to the interaction ...
متن کاملThe Electromagnetic Background Environment for the Interaction-point Beam Feedback System at the International Linear Collider
The Interaction Point (IP) feedback system is essential for maintaining the luminosity at the International Linear Collider (ILC). It is necessary to demonstrate the performance of the feedback beam position monitor (BPM) in an electron-positron pair background similar to that expected in the ILC interaction region (IR). We have simulated the ILC beam-beam interactions and used a GEANT model of...
متن کاملارزیابی آلودگی فوتونی اپلیکاتور Beam Shaper با استفاده از شبیه سازی مونت کارلو
Background and purpose: Beam shaper is a type of applicator used in conjunction with the intraoperative electron radiotherapy. This study aimed at quantitative evaluation of the photon contamination of this applicator using Monte Carlo simulation. Materials and methods: In this experimental study, at first the head of LIAC accelerator was simulated along with the beam shaper applicator using...
متن کاملEffect of Riser-Seabed Interaction on the Dynamic Behavior of Risers
In recent years, the production of oil and gas has been developed in deep water depths which exceed 500m. Deep water developments are being followed strongly in different parts of the world (Caspian Sea, Gulf of Mexico, etc.). The movement of floater causes severe stress at the touchdown point (TDP) in steel catenary risers (SCR). The main objective of this study was to simulate the exact behav...
متن کاملTwo universal extra dimensions and spinless photons at the ILC
We study the ILC phenomenology of (1,0) Kaluza-Klein (KK) modes along two universal extra dimensions compactified on the chiral square. We compute production cross sections of various (1,0) particles at the ILC with √ s = 1 TeV, focusing on decays of KK-leptons and the KK partner of hypercharge gauge boson down to the " spinless photon " which is the lightest KK particle. We contrast this model...
متن کامل