Niobium Josephson junction bolometers for optical detection in the VIS-IR region
نویسندگان
چکیده
|The response of Nb Josephson junctions fabricated on di erent substrates, silicon and amorphous glass, is measured under optical illumination at several conditions of light intensity and light chopping frequency. The linearity of the response on the optical power extends over ve orders of magnitude. The signal of the junction on silicon is 2 order of magnitude lower than that of the junction on amorphous glass, but at least one order of magnitude faster, as the time constant of a directly irradiated junction on silicon is lower than 10 s. The signal dependence on chopping frequency of the junction on amorphous glass is typical of a strong thermal coupling between lm and substrate, while for the junction on silicon it depends mainly on the thermal boundary resistance between lm and substrate.
منابع مشابه
Suspended Tunnel Junction Bolometers For Terahertz Range
Implementation of high resolution passive THz cameras operated at cryogenic temperatures of a few Kelvin benefits from a large number of pixels. At present, building a cryogenic multiplexed read-out circuit represents a challenging task. Here we propose and demonstrate broadband niobium-based tunnel junction bolometers operating in equilibrium regime at 4 K, and read out with a room temperature...
متن کاملFabrication and measurement of a niobium persistent current qubit
Recent successes with superconducting Josephson junction qubits make them prime candidates for the implementation of quantum computing. This doctoral thesis details the study of a niobium Josephson junction circuit for quantum computing applications. The thesis covers two main areas: 1) the fabrication of sub-micron niobium Josephson junction devices using a Nb/Al/AlO./Nb trilayer process and 2...
متن کاملHexagonal symmetry of magnetic field dependence of Josephson current through triangle shape superconducting junctions
We have found hexagonal symmetry in the dependence of Josephson current of triangle shape junctions upon external magnetic field. Niobium/aluminum-oxide/niobium junctions are fabricated using magnetron sputtering of niobium and thermal oxidation of aluminum layers. Selective niobium anodization process has been used to define junction areas. In the case of square shaped junction, dependence of ...
متن کاملSimulation of IR Detector at Communication Window of 1550nm based on Graphene
In this paper, photodetection properties of a Graphene-based device at the third telecommunication window have been reported. The structure of the device is a Graphene-silicon Schottky junction which has been simulated in the form of an infrared photodetector. Graphene has specific electrical and optical properties which makes this material a good candidate for optoelectronic applications. Phot...
متن کاملAnodization-based process for the fabrication of all niobium nitride Josephson junction structures
We studied the growth and oxidation of niobium nitride (NbN) films that we used to fabricate superconductive tunnel junctions. The thin films were deposited by dc reactive magnetron sputtering using a mixture of argon and nitrogen. The process parameters were optimized by monitoring the plasma with an optical spectroscopy technique. This technique allowed us to obtain NbN as well as good qualit...
متن کامل