Micromechanical modeling of fiber reinforced pervious concrete composites

نویسنده

  • Mijia mijia. yang Yang
چکیده

Pervious concrete is widely used in today’s construction industry, e.g.. parking lots, airport runways, etc. However, the durability and strength of the porous concrete remains a challenge, as the binding material proportion is low and the use of fi ne aggregates is nearly 0. Increasing the compressive load, the failure appears fi rst in the weak concrete zone induced by the random distribution of voids. The process continues until the failure of the whole specimen occurs. In this study, the infl uence of random distribution of voids and void percentage on the strength and permeability of earlier concrete specimen is studied. A fi nite element model is generated by using MATLAB & ANSYS with a subroutine written in ANSYS Parametric Design Language. Load-defl ection plots are generated and the obtained results including stiffness, strength and permeability are compared with the results from the experiments conducted following ASTM standards. A numerical fi ber reinforced concrete specimen is also generated and the stiffness of the specimen was calculated and compared with the Kerner model. All the results numerically obtained are around or >90% accuracy of the experiment derived values, which validates the suggested micromechanical model of earlier concrete composite is a viable approach for predicting behavior of earlier concrete composites and could guide its future design for any specifi c functions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Engineered Cementitious Composites (ecc) – Tailored Composites through Micromechanical Modeling

This article provides a brief overview of several classes of fiber reinforced cement based composites and suggests future directions in FRC development. Special focus is placed on micromechanics based design methodology of strain-hardening cement based composites. As example, a particular engineered cementitious composite newly developed at the ACE-MRL at the University of Michigan is described...

متن کامل

Modeling of progressive damage in aligned and randomly oriented discontinuous fiber polymer matrix composites

Damage constitutive models based on micromechanical formulation and a combination of micromechanical and macromechanical damage criterions are presented to predict progressive damage in aligned and random fiber-reinforced composites. Progressive interfacial fiber debonding models are considered in accordance with a statistical function to describe the varying probability of fiber debonding. Bas...

متن کامل

Experimental Strengthening of the Two-way Reinforced Concrete Slabs with High Performance Fiber Reinforced Cement Composites Prefabricated Sheets

Reinforced concrete structures need to be strengthened and retrofitted for various reasons, including errors during design and/or construction, so in most cases strengthening of structural elements is much more economical than rebuilding the structure. Using HPFRCC with tensile stiffening behavior has been developed to strengthen the concrete structures over the recent few years. In this paper,...

متن کامل

Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function

One of the most famous methods to predict the stiffness of short fiber composites is micromechanical modeling. In this study, a Representative Volume Element (RVE) of a beech wood flour natural composite has been designed and the orientation averaging approach has been utilized to predict its stiffness tensor. The novelty of this work is in finding the proper fiber orientation distribution func...

متن کامل

Analytical and numerical modeling of erosive projectiles into steel fiber reinforced concrete target

In this paper, modeling of high speed projectiles with different nose shapes, penetrating into steel fiber reinforced concrete is investigated. This is a novel study because it considers the length to diameter ratio of steel fiber as well as projectile length to diameter ratio and volume fraction of fiber used in concrete matrix on the impact resistance of steel fiber reinforced concrete fibers...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014