An Analytical Model for Alloyed Ohmic Contacts Using a Trilayer Transmission Line Model
نویسندگان
چکیده
منابع مشابه
Investigation of post-annealing effect on efficient ohmic contact to ZnO thin film using Ti/Al metallization strategy
Ohmic and Schottky contacts are playing a major role in the field of ZnO based electronics device fabrication. It is seen that several works have been reported on metallization scheme, contacts with this semiconducting material. But, the thickness of semiconducting material and the choosing of substrate still remain imperfect and inefficient for advanced IC technology. To estimate contact resis...
متن کاملNanoscale electro-structural characterisation of ohmic contacts formed on p-type implanted 4H-SiC
This work reports a nanoscale electro-structural characterisation of Ti/Al ohmic contacts formed on p-type Al-implanted silicon carbide (4H-SiC). The morphological and the electrical properties of the Al-implanted layer, annealed at 1700°C with or without a protective capping layer, and of the ohmic contacts were studied using atomic force microscopy [AFM], transmission line model measurements ...
متن کاملImproved Low Resistance Contacts of Ni/Au and Pd/Au to p-Type GaN Using a Cryogenic Treatment
A low resistance Ohmic contact to p-type GaN is essential for reliable operation of electronic and optoelectronic devices. Such contacts have been made using Ni/Au and Pd / Au contacts to p-type Mg-doped GaN (1.41x10 cm) grown by metalorganic chemical vapor deposition ( MOCVD ) on ( 0001 ) sapphire substrates. Thermal evaporation was used for the deposition of those metals followed by annealing...
متن کاملA Novel Pd-based Ohmic Contact System for n-type GaAs: A Structural, Morphological and Electrical Investigation
A novel Pd-based Ohmic contact system is developed for n-GaAs. Metallization samples are annealed at various temperatures and systematically characterized using current-voltage (I-V) measurements, Tencor surface profilometry measurements, Scanning electron microscopy (SEM) and Secondary ion mass spectrometry (SIMS). Tencor measurements and SEM are employed to investigate the surface morphology ...
متن کاملContact effects in polymer field-effect transistors
Contact resistances often contribute significantly to the overall device resistance in organic field-effect transistors (OFETs). Understanding charge injection at the metal-organic interface is critical to optimizing OFET device performance. We have performed a series of experiments using bottom-contact poly(3-hexylthiophene) (P3HT) OFETs in the shallow channel limit to examine the injection pr...
متن کامل