Direct laser printing of biotin microarrays on low temperature oxide on Si substrates
نویسندگان
چکیده
منابع مشابه
Solution-processed polycrystalline silicon on paper
Printing electronics has led to application areas which were formerly impossible with conventional electronic processes. Solutions are used as inks on top of large areas at room temperatures, allowing the production of fully flexible circuitry. Commonly, research in these inks have focused on organic and metal-oxide ink materials due to their printability, while these materials lack in the elec...
متن کاملLow Temperature Polysilicon Thin-Film Transistors on Flexible Substrates
We fabricated low-temperature polycrystalline silicon thin-film transistors (poly-Si TFTs) on flexible substrates using sputtered amorphous Si (a-Si) precursor films. The a-Si precursor films were deposited by using rf-magnetron sputtering system with argon-helium mixture gas to minimize the argon incorporation into the Si film. The a-Si films were laser annealed by using XeCl excimer laser and...
متن کاملHigh-resolution electrohydrodynamic inkjet printing of stretchable metal oxide semiconductor transistors with high performance.
As demands for high pixel densities and wearable forms of displays increase, high-resolution printing technologies to achieve high performance transistors beyond current amorphous silicon levels and to allow low-temperature solution processability for plastic substrates have been explored as key processes in emerging flexible electronics. This study describes electrohydrodynamic inkjet (e-jet) ...
متن کاملNew approach to laser direct writing active and passive mesoscopic circuit elements
Ž . We have combined some of the major positive advantages of laser-induced forward transfer LIFT and matrix-assisted Ž . pulsed laser evaporation MAPLE , to produce a novel excimer laser driven direct writing technique which has demonstrated the deposition in air and at room temperature and with sub-10 mm resolution of active and passive prototype circuit elements Ž on planar and nonplanar sub...
متن کاملA Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کامل