Mechanical properties of resin
نویسندگان
چکیده
Purpose: Materials and Methods:
منابع مشابه
Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites
In this work, nanocrystalline Fe85Si10Ni5 soft magnetic powders were prepared by mechanical alloying and subsequent annealing to reduce the internal stresses and lattice strains. The powders were mixed with phenolic resin and warm pressed to produce nanostructured soft magnetic composites. The effect of annealing time and temperature on the crystalline structure, microstructure and magnetic pro...
متن کاملExperimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites
This paper investigated the effect of the amine-functionalized carbon nanotubes (CNTs) on the thermomechanical properties of CNT/epoxy nanocomposites. Mechanical stirring and ultra-sonication were utilized to uniformly disperse CNTs into the epoxy matrix. Non-functionalized and amine-functionalized CNTs with different weight percentages (wt. %) were mixed into the epoxy resin. Using standard te...
متن کاملEnhancing Mechanical Strength of Inorganic Geopolymer by Using Phenol Resin
The effect of organic phenol on the compressive and flexural strength of a metakaolin based geopolymer is studied. It was found that 12 wt% phenol resins can increase the compressive and flexural strength by 30% and 65% respectively. In addition, the reinforcing effect of phenol resin is higher in Na-PS and Na-PSS type geopolymers rather than Na-PSDS. Two distinct endothermic peaks were detecte...
متن کاملSynthesis of new dental nanocomposite with glass nanoparticles
Objective(s): The aim of this study was to synthesis new dental nanocomposites reinforced with fabricated glass nanoparticles and compare two methods for fabrication and investigate the effect of this filler on mechanical properties. Materials and Methods: The glass nanoparticles were produced by wet milling process. The particle size and shape was achieved using PSA and SEM. Glass nanoparticle...
متن کاملThe Effect of Epoxy-Polysulfide Copolymer Curing Methods on Mechanical-Dynamical and Morphological Properties
Epoxy – Polysulfide copolymers without or with low amounts of epoxy in their structure have poor mechanical properties in oxidative curing system.To strengthen the mechanical properties of polysulfide elastomer inclusion of epoxy resin (Epon828) as hard segment was studied. FT-IR spectroscopy and rheometry were used to verify the formation of epoxy-polysulfide copolymer. Results obtained f...
متن کاملComparison Studies on Corrosive Properties of Polyester Filled Graphene Primer Coatings via Sonication and Mechanical Method
This paper investigates the mixing of the graphene (GR) particles in the polyester (PE) resin by using two different dispersion techniques which are mechanical stirring and sonication method. This paper shows that the mixing method has a significant effect on the corrosive behavior of the coatings. Fourier Transform Infrared Spectroscopy (FT-IR) characterization technique is done to analyze...
متن کامل