Experimental Study on Reduction of Oil Circulation Rate in Rotary Compressor
نویسندگان
چکیده
The performance of air conditioner and the reliability of compressor could be reduced, if the refrigerant gas is discharged from compressor with excessive lubricating oil. Thus, the study of the reduction of the oil circulation rate in the compressor is required to resolve the problem. In this paper, five feasible approaches to decrease the oil circulation rate were confirmed by experiment. the experimental results shows that the effect of the vortical oil separator based on the centrifugal theory is best of all, installed in the compressor motor rotor ,with oil circulation ratio less than 0.1wt%.
منابع مشابه
Oil Circulation Rate in Rotary Compressor: Its Measurement and Factors Affecting the Rate
Oil circulation rate is a crucial factor affecting air-conditioning system performance and rotary compressor reliability. This paper illustrates several design concepts to reduce oil circulation rate and discusses their effectiveness. This paper also discusses how to measure the rate in terms of accuracy and repeatability with a statistical significance.
متن کاملCFD Analysis of Discharge Gas flow in Rotary Compressor for OCR reduction
This paper presents the use of CFD as a design tool in the development of rotary compressor for the purpose of reduction in Oil Circulation Rate (OCR). In the present work, CFD analysis is done using a commercial CFD package to simulate the discharge gas flow within the rotary compressor. Discharge gas flow path in the compressor is redefined by providing features that support OCR reduction. On...
متن کاملImprovement Of Abnormal Wear Between The Vane-slot And Vane In Rotary Compressor
The reason for the abnormal wear between the vane-slot and the vane in the rotary compressor is analyzed in this paper. Firstly, the influence of lubrication at the clearance, the machining equipment accuracy and oil circulation (oil flow rate) is analyzed. Then the material characteristics including the hardness of the vane and vane-slot, the surface treatment of the vane and the deformation o...
متن کاملExperimental Study on the Bench Evaluation Technique of Oils for Oil-Injected Rotary Compressors
The paper discusses a fundamental method of accelerated bench tests for oil-injceted rotary compressor oils. The test compressor, test conditions and evaluated performance indexes of the oils are reasonably determined according to the results of bench tests and field services of the oils.
متن کاملAn Experimental Study of the Shaft Oil Supply Mechanism of a Rotary Compressor
This paper describes the experimental study of the shaft oil feed mechanism of a rotary compressor. The oil contained in the shaft in which an oil pump is inserted is fed to the respective sliding surfaces of the subbearing section, eccentric section and main bearing section of the shaft by centrifugal force of shaft rotation. The oil feed pressure of shaft rotation is approximately 0.1 kg/cm2 ...
متن کامل