PD control with on-line gravity compensation for robots with elastic joints: Theory and experiments

نویسندگان

  • Alessandro De Luca
  • Bruno Siciliano
  • Loredana Zollo
چکیده

A proportional-derivative (PD) control with on-line gravity compensation is proposed for regulation tasks of robot manipulators with elastic joints. The work extends a previous PD control with constant gravity compensation at the desired configuration. The control law requires measuring only position and velocity on the motor side of the elastic joints, while the on-line gravity compensation torque uses a biased measure of the motor position. It is proved via a Lyapunov argument that the control law globally asymptotically stabilizes the desired robot configuration. A simulation study on a two-joint arm reveals the better performance that can be obtained with the new scheme as compared to the case of constant gravity compensation. Moreover, the proposed controller is experimentally tested on an eightjoint cable-driven robot manipulator, in combination with a point-to-point interpolating trajectory, showing the practical advantages of the on-line compensation. 2005 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Asymptotically Stable Joint PD Controller for Robot Arms with Flexible Links Under Gravity

'The regulation problem for articulated mechanical arms is often solved by designing simple control laws which strongly exploit the physical properties of the system. It is well known that a rigid robot can be globally asymptotically stabilized around a given joint configuration via a P D controller on the joint errors, provided that gravity is exactly cancelled by feedback [l]. Under a mild co...

متن کامل

Learning Gravity Compensation in Robots: Rigid Arms, Elastic Joints, Flexible Links Alessandro De Luca and Stefan0 Panzieri

The setpoint regulation problem for robotic manipulators is a basic task that can be solved either by PID control or by model-based gravity compensation. These approaches are commonly applied both to rigid arms and to robots with flexible links and/or elastic joints. However, PID control requires fine and lengthy tuning of gains in order to achieve good performance over the whole workspace. Mor...

متن کامل

Compliance Control for an Anthropomorphic Robot with Elastic Joints: Theory and Experiments

Studies on motion control of robot manipulators with elastic joints are basically aimed at improving robot performance in tracking or regulation tasks. In the interaction between robots and environment, instead, the main objective of a control strategy should be the reduction of the vibrational and chattering phenomena that elasticity in the robot joints can cause. This work takes into account ...

متن کامل

Integer-order Versus Fractional-order Adaptive Fuzzy Control of Electrically Driven Robots with Elastic Joints

Real-time robust adaptive fuzzy fractional-order control of electrically driven flexible-joint robots has been addressed in this paper. Two important practical situations have been considered: the fact that robot actuators have limited voltage, and the fact that current signals are contaminated with noise. Through of a novel voltage-based fractional order control for an integer-order dynamical ...

متن کامل

Delay Compensation on Fuzzy Trajectory Tracking Control of Omni-Directional Mobile Robots

This paper presents a delay compensator fuzzy control for trajectory tracking of omni-directional mobile robots. Fuzzy logic control (FLC) of the robots is a suitable strategy for dealing with model uncertainties, nonlinearities and disturbances.  On the other hand, in many robotic applications such as mobile robots, delay phenomenon is able to substantially deteriorate the behavior of system's...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Automatica

دوره 41  شماره 

صفحات  -

تاریخ انتشار 2005