Pseudo Wire Emulation Edge-to-Edge (PWE3) Architecture
نویسندگان
چکیده
Pseudo Wire Emulation Edge-to-Edge (PWE3) Architecture Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract This document describes an architecture for Pseudo Wire Emulation Edge-to-Edge (PWE3). It discusses the emulation of services such as Frame Relay, ATM, Ethernet, TDM, and SONET/SDH over packet switched networks (PSNs) using IP or MPLS. It presents the architectural framework for pseudo wires (PWs), defines terminology, and specifies the various protocol elements and their functions.
منابع مشابه
Juniper Networks, Inc.
This document describes generic requirements for Pseudo-Wire Emulation Edge to Edge (PWE3). It provides guidelines for other working group documents that will define mechanisms for providing pseudo-wire emulation of specific services such as Ethernet, ATM, Frame Relay, TDM, and MPLS. It should be noted that the PWE3 Working Group (PWE3 WG) standardizes mechanisms that can be used to provide PWE...
متن کاملRequirements for Edge-to-Edge Emulation of Time Division Multiplexed (TDM) Circuits over Packet Switching Networks
This document defines the specific requirements for edge-to-edge emulation of circuits carrying Time Division Multiplexed (TDM) digital signals of the Plesiochronous Digital Hierarchy as well as the Synchronous Optical NETwork/Synchronous Digital Hierarchy over packet-switched networks. It is aligned to the common architecture for Pseudo Wire Emulation Edge-to-Edge (PWE3). It makes references t...
متن کاملRFC 4623 PWE 3 Fragmentation and Reassembly August 2006
Pseudowire Emulation Edge-to-Edge (PWE3) Fragmentation and Reassembly Status of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distributio...
متن کاملPseudowire Emulation Edge-to-Edge (PWE3) Frame Check Sequence Retention
1. Overview ........................................................1 2. Specification of Requirements ...................................3 3. Signaling FCS Retention with MPLS-Based Pseudowires .............3 4. Signaling FCS Retention with L2TPv3-Based Pseudowires ...........4 5. Security Considerations .........................................5 6. Applicability Statement .......................
متن کاملEngineering Task Force ( IETF ) M
The framework for MPLS in transport networks (RFC 5921) provides reference models for the MPLS Transport Profile (MPLS-TP) Transport Service Interfaces, which are a User-to-Network Interface (UNI), and a Network-to-Network Interface (NNI). This document updates those reference models to show detailed reference points for these interfaces, along with further clarification of the functional archi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- RFC
دوره 3985 شماره
صفحات -
تاریخ انتشار 2005