Real-time monitoring for corona-electrostatic separation in recycling waste printed circuit boards
نویسنده
چکیده
منابع مشابه
Separation of Printed Circuit Board by Temperature Shock
In this contribution we are dealing with the possibility of electronic waste separation by temperature effect. It gives a possible direction how to solve the problem of increasing with electronic waste not only in Czech Republic, but also throughout the world. Further, we are dealing with of heat transfer inside the printed circuit boards (PCB) and with thermal longitudinal expansion of used ma...
متن کاملRecycling efforts in the UAE for e-waste
Printed circuit boards (PCBs) are currently being dumped in landfills or incinerated which is causing a serious environmental harm in the form of toxic gases or leached hazardous compounds. PCBs contain high amounts of precious metals; about 20 wt% copper, 0.04 wt% gold, 0.15 wt% silver, and 0.01 wt% palladium. The extraction of these metals from PCBs is both profitable and environmentally wort...
متن کاملA Novel Designed Bioreactor for Recovering Precious Metals from Waste Printed Circuit Boards
For recovering precious metals from waste printed circuit boards (PCBs), a novel hybrid technology including physical and biological methods was developed. It consisted of crushing, corona-electrostatic separation, and bioleaching. Bioleaching process is the focus of this paper. A novel bioreactor for bioleaching was designed. Bioleaching was carried out using Pseudomonas chlororaphis. Bioleach...
متن کاملSeparation and Recovery of Fine Particles from Waste Circuit Boards Using an Inflatable Tapered Diameter Separation Bed
Recovering particle materials from discarded printed circuit boards can enhance resource recycling and reduce environmental pollution. Efficiently physically separating and recovering fine metal particles (-0.5 mm) from the circuit boards are a key recycling challenge. To do this, a new type of separator, an inflatable tapered diameter separation bed, was developed to study particle motion and ...
متن کاملA review of the recycling of non-metallic fractions of printed circuit boards
There is a big waste generation nowadays due to the growing demand for innovation and the fact that more and more products have a reduced lifetime, increasing the volume of dumps and landfills. Currently, one of the segments of large volume is the technology waste, which reflects on the printed circuit boards (PCBs) that are the basis of the electronics industry. This type of waste disposal is ...
متن کامل