CALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
نویسندگان
چکیده
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigated binaries. The FactSage programme was used for all thermodynamic calculations.
منابع مشابه
THERMODYNAMIC CHARACTERIZATION OF SHAPE MEMORY Al- Ni-Fe ALLOYS USING FACTSAGE
Shape memory alloys have again appealed a lot in recent years as new special materials of unusual macroscopic features that make them interesting for study and research as well as for their multifunctional application in various branches of techniques. Shape memory refers to the ability of certain plastic metals and alloys to regain their original shape during the heating process due to complet...
متن کاملOn Sluggish Diffusion in Fcc Al–Co–Cr–Fe–Ni High-Entropy Alloys: An Experimental and Numerical Study
High-throughput measurement using the numerical inverse method combined with the diffusion multiple technique was employed to determine the composition-dependent interdiffusion coefficients in fcc Al–Co–Cr–Fe–Ni high-entropy alloys at 1273, 1323, and 1373 K. The reliability of the obtained interdiffusion coefficients was confirmed by comparing the model-predicted composition/interdiffusion flux...
متن کاملDevelopment of Metallic Hot Gas Filters
Successful development of metallic filters with high temperature oxidation/corrosion resistance for fly ash capture is a key to enabling advanced coal combustion and power generation technologies. Compared to ceramic filters, metallic filters can offer increased resistance to impact and thermal fatigue, greatly improving filter reliability. A beneficial metallic filter structure, composed of a ...
متن کاملPhase transformations and segregation in Fe–Ni alloys and nanoalloys
Ordering and segregation properties of Fe–Ni alloys and nanoalloys are investigated by means of Metropolis Monte Carlo (MMC) and molecular dynamics (MD) simulations. The model is based on an embedded atom potential which, according to thermodynamic integration, only stabilizes those phases that are observed experimentally. This stability is confirmed by MMC and the same phases are found stable ...
متن کاملFerromagnetic shape memory alloys: Alternatives to Ni–Mn–Ga
This paper intends to review the state-of-the-art in the field of ferromagnetic shape memory alloys different than Ni–Mn–Ga, developed in the ast years. It starts with the effects of additions of different fourth elements to Ni–Mn–Ga and continues with the review of other Heusler (or B2) i-based and Co-based alloy systems, like Ni–Mn–X, Ni–Fe–Ga, Co–Ni–Al and Co–Ni–Ga alloys. Finally, ferromagn...
متن کامل