An interleaved class E2 dc/dc converter

نویسندگان

  • Motoki Katayama
  • Hiroo Sekiya
  • Takashi Yahagi
چکیده

This paper presents an interleaved class E2 dc/dc converter. In the proposed converter, N class E2 dc/dc converters are connected in parallel at the class E rectifier. The proposed converter is suitable to the low-voltage/high-current applications. Since less current flows through the each converter, the amount of the power losses on the parasitic resistances are also reduced. In addition, the output filter of the rectifier is downsized because of higher frequency of the interleaved current. By carrying out the circuit experiments, we show that the experimental results agree with the numerical ones quantitatively. The laboratory measurement achieves the over 90% power conversion efficiency under 3.2W and 1MHz operation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Novel Interleaved DC-DC Converter with Reduced Loss for Fuel Cell Vehicle Application

In this paper a novel four-leg interleaved DC-DC boost converter is proposed which is well suitable for fuel cell vehicles (FCV) application. The voltage stress of two switches of this converter is half of the conventional interleaved converters. Therefore, smaller and cheaper switches can be utilized. Also "on" state duration of the two of four switches are reduced in comparison with...

متن کامل

An Interleaved Configuration of Modified KY Converter with High Conversion Ratio for Renewable Energy Applications; Design, Analysis and Implementation

In this paper, a new high efficiency, high step-up, non-isolated, interleaved DC-DC converter for renewable energy applications is presented. In the suggested topology, two modified step-up KY converters are interleaved to obtain a high conversion ratio without the use of coupled inductors. In comparison with the conventional interleaved DC-DC converters such as boost, buck-boost, SEPIC, ZETA a...

متن کامل

Implementation of Floating Output Interleaved Input DC-DC Boost Converter

This paper presents the analysin ,design and implementation of a high voltage ratio topology of DC-DC converter. The DC-DC converter has high voltage ratio with reduced input current, output voltage and output current ripple, and also reduces the voltage and current rating of power electronics components and compared with conventional boost converter. The voltage stress on the switches are  red...

متن کامل

A Coupled Inductor Based High Voltage Gain DC-DC Converter Using Interleaved Voltage Multiplier Cells

In this work, a non-isolated high step up DC-DC converter using coupled inductor and voltage multiplier cell is proposed. The proposed converter conversion ratio is efficiently extended by using a coupled inductor. An interleaved configuration of two diode-capacitor cells is applied to step up the voltage conversion ratio and decrease the voltage stress across the switches. Also, in the suggest...

متن کامل

High Step-Up Interleaved DC/DC Converter Using VM Cell for PV Applications

This work proposes a high step-up interleaved dc/dc topology utilizing a VM (voltage multiplier) cell suitable for PV applications. The VM cells D/C (Diode/Cap.) are cascaded among the phases to approach a high voltage gain. Besides, the voltage converting ratio of the presented structure can be improved by extending the VM cells and it also leads to drop in the normalized voltage stress throug...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008