Understanding RF/Microwave Solid State Switches and their Applications
ثبت نشده
چکیده
Application Note
منابع مشابه
Solid-state Power Switches for Hpm Modulators
Power modulators for pulsed microwave applications, generally utilizing a thyratron-switched PFN, typically produce 50-120 kV, 1-2 kA microsecond timescale pulses with sub-microsecond ( -100-200 nsec) risetimes. This paper will review an investigation into the feasibility of utilizing certain solid-state power switches at the relatively fast speeds required for HPM modulators. Two very differen...
متن کاملRF MEMS and their applications in NASA's space communication systems
RF and microwave communication systems rely on frequency, amplitude, and phase control circuits to efficiently use the available spectrum. Phase control circuits are required for electronically scanning phase array antennas that enable radiation pattern shaping, scanning, and hopping. Two types of phase shifters, which are the phase control circuits, are most ot'ten used. The first is comprised...
متن کاملRF MEMS Switch Technology
Commercial Applications Solid state and electromagnetic relay switches are being replaced by MEMS switches due to their lower costs and increased application performance. Some of the benefits of MEMS switches include low power consumption, long life cycle, linearity and increased switching speeds. Applications include highspeed digital channel switching in automated test equipment, filter bank ...
متن کاملVoltage Droop Compensation for Marx Modulators*
Marx modulators operated by solid-state switches (e.g. MOSFET, IGBT) offer an alternative to traditional high voltage (HV) modulators for rf power sources. They have the merits of compact size, high-energy efficiency, high reliability, pulse width control and cost reduction. However, Marx modulators need a complex voltage compensation circuit if they are employed in long pulse applications such...
متن کاملReliability of Capacitive RF MEMS Switches at High and Low Temperatures
Some applications of RF MEMS switches, such as aircraft condition monitoring and distributed satellite communication, present a unique challenge for device design and reliability. This article examines these switches when operational temperatures in the range 60°C to 100°C are envisioned. The basic operation of a capacitive MEMS switch is described and two tools for examining device reliability...
متن کامل