Fast Start-up of a Combined-Cycle Power Plant: A Simulation Study with Modelica
نویسندگان
چکیده
The paper deals with the modelling and simulation of fast start-up transients of a combined-cycle power plant. The study is aimed at reducing the start-up time while keeping the life-time consumption of the more critically stressed components under control. The structure of the model, based on the ThermoPower library, and the main modelling assumptions are illustrated. Selected simulation results are included and discussed.
منابع مشابه
تعیین نقطۀ بهینۀ ترکیب آبشیرینکن چندمرحلهای تبخیری با نیروگاه سیکل ترکیبی
In this paper, the feasibility of using heat energy of steam turbine combined cycle power plant as the energy required to start up desalination systems has been studied. The optimal model of combined cycle power plant equipped with a multi-effect desalination plants in different design modes of the effects of desalination and steam pressure of the steam turbine output has been evaluated. In ord...
متن کاملThermodynamic modeling and comprehensive off-design performance analysis of a real integrated solar combined cycle power plant
In this paper thermodynamic modeling and comprehensive performance analysis of a real integrated solar combined cycle (ISCC) power plant are performed. Performance of the plant cycle is assessed in off-design condition and in two operation modes of power-boosting and fuel-saving. Such an approach has not been considered for an ISCC plant in the previous studies. Under studied ISCC which is loca...
متن کاملOptimization and Exergy, Economic and Environmental Analysis of a Combine Cycle Power Plant
In this study, a combined cycle power plant with a nominal capacity of 500 MW, including two gas units and one steam unit, was considered by the mathematical model of thermodynamic modeling and the results of the modeling were controlled by the design information of the system. Then, the objective functions are optimized by considering the decision variables. In this multi-objective optimizatio...
متن کاملModeling of a Geothermal Cycle Condenser in a Combined Diesel Power Cycle: Case Study of 42 MW Diesel Power Plant in Moghan and Ardabil
This paper presents the results of a research into the feasibility of recovering waste heat and determining design parameters of a recovery boiler for a set of medium-speed diesel generators with a capacity of 7 MW (the nominal capacity of all units is 42 MW, which would be a study on a unit). And is used to generate electricity. The main purpose of this study is to design a thermal waste recov...
متن کاملImprovement of Efficiency of Coal-Fired Steam Power Plant by Reducing Heat Rejection Temperature at Condenser Using Kalina Cycle
This paper proposes an approach for improving the plant efficiency by reducing the heat rejection temperature of power cycle using Kalina Cycle System 11 (KCS11) which is integrated at the steam condenser of a 500 MWe SubC (subcritical) coal-fired power plant. It is modelled by using power plant simulation software ‘Cycle Tempo’ at different plant operating conditions. Results show t...
متن کامل