The Role of Misfit-Strain Energies during Precipitation of ''-Nitride in Fe-N Martensite
نویسندگان
چکیده
The structural changes occurring during tempering of Fe-N martensite (a') have been investigated using X-ray diffraction and (high resolution) transmission electron microscopy. The first stage of decomposition of Fe-N martensite leads to the formation of &-nitride and ferrite (a). The formation of a"-nitride involves both a local enrichment and ordering of N atoms; the Fe sublattice remains of b.c.t. type. The structural changes which take place can be largely understood as the outcome of the competition between ordering of nitrogen atoms in a" precipitates and the developing of a considerable misfit between the a" precipitates and the dla matrix. In the initial stage of decomposition the misfit is relatively small, and precipitation of perfect a" (i.e. Fe16N2) occurs in the martensite matrix. Upon tempering the matrix becomes ferrite and the misfit increases considerably (up to about 10 pct). This misfit is reduced by the formation of vacancies on the nitrogen sublattice in a"-nitride, i.e. precipitation of imperfect a" (Fe 1 6N2-x) takes place. After complete decomposition, upon continued annealing the nitrogen-concentration variations within the a" precipitates disappear and the precipitates become of composition Fe16N2. Then the misfit is accommodated mainly by local deformation of the ferrite lattice.
منابع مشابه
Strain-Induced Martensite Transformation Simulations during Cold Rolling of AISI 301 Austenitic Stainless Steel
Austenite is a semi-stable phase in most stainless steels that deforms to martensite under Md30 and forms martensitetype ά and ε due to the deformation in the steels. Since the distribution of strain induced martensite plays animportant role in achieving desired properties, the main objective of the present work is to model martensitedistribution of ά during cold rolling using...
متن کاملEffect of Strain Induced Martensite on the Deep Drawing Behavior of 304L Steel: Simulation and Experiment
Abstract In the present research, the behavior of 304L austenitic stainless steel in the deep drawing process has been studied at the room temperature through experimental and finite element simulation method. Magnetic method calibrated by XRD was used to measure induced-martensite. Martensite volume fraction in the various portion of the deep drawn cup under optimum Blank Holder Force (BHF) a...
متن کاملTexture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree
It has been clarified that deformation and annealing of martensite starting structure can produce ultrafine-grained structure in low carbon steel. This study aims to investigate the texture evolution and mechanical properties of samples with martensite structure deformed by two different forging processes. The martensitic steel samples were forged by plane strain compression and multi-directio...
متن کاملEffects of Composition and Ausaging
Magnetic Shape-Memory (MSM) materials are a new category of actuator materials with the potential to produce both large actuator strain and rapid response. To explore the possibility of developing MSM materials based on Fe-Ni-Co-Ti alloys, the effects of chemical composition (Co/Ni ratio) and ausaging on microstructure and magnetic shapememory response were studied. A suitable choice of chemica...
متن کاملPrecipitation of nitrides in iron-based binary and ternary alloys; influence of defects and transformation-misfit stresses
The effect of the initial microstructure (recrystallized or cold-rolled) on the nitride-precipitation process upon gaseous nitriding of ternary, ferritic, Fe-Cr-Al alloy was investigated at 450°C. In the recrystallized specimens, precipitation of metastable ternary, cubic, NaCl-type mixed Cr1xAlxN took place, whereas in the cold-rolled specimens precipitation of firstly binary cubic NaCltype Cr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016