A Comparison of Input Shaping and Time-optimal Flexible-body Control
نویسندگان
چکیده
Input shaping is a method of reducing residual vibrations in computer-controlled machines. Shaped command profiles are generated by convolving a sequence of impulses, an input shaper, with the desired command signal. The shaped command profile will move the system without residual vibration. The performance of several types of input shapers is compared to the time-optimal flexible-body control in terms of maneuver speed, amplitude of transient deflection, robustness to modeling errors, excitation of unmodeled high modes, and ease of implementation. To facilitate the comparison, time-optimal flexible-body control is treated as a special case of input shaping.
منابع مشابه
COMPARISON BETWEEN MINIMUM AND NEAR MINIMUM TIME OPTIMAL CONTROL OF A FLEXIBLE SLEWING SPACECRAFT
In this paper, a minimum and near-minimum time optimal control laws are developed and compared for a rigid space platform with flexible links during an orientating maneuver with large angle of rotation. The control commands are considered as typical bang-bang with multiple symmetrical switches, the time optimal control solution for the rigid-body mode is obtained as a bang-bang function and app...
متن کاملNear-Minimum Time Optimal Control of Flexible Spacecraft during Slewing Maneuver
The rapid growth of space utilization requires extensive construction, and maintenance of space structures and satellites in orbit. 
This will, in turn, substantiate application of robotic systems in space. In this paper, a near-minimum-time optimal control law is developed for a rigid space platform with flexible links during an orientating maneuver with large angle of rotation. The time op...
متن کاملNear-Minimum Time Optimal Control of Flexible Spacecraft during Slewing Maneuver
The rapid growth of space utilization requires extensive construction, and maintenance of space structures and satellites in orbit. This will, in turn, substantiate application of robotic systems in space. In this paper, a near-minimum-time optimal control law is developed for a rigid space platform with flexible links during an orientating maneuver with large angle of rotation. The time opti...
متن کاملControl of Flexible Link Robot using a Closed Loop Input-Shaping Approach
This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...
متن کاملComparison of Input Shaping Teclhniques for Speed-Critical Multi-Mode Flexible Systems
To achieve the highest level performance with computer controlled machines, the flexibility of the system must be taken into account. Feedforward methods are often the most desirable means of eliminating vibration. The fastest motions can be obtained by using the timeoptimal flexible-body command. These commands depend on the system parameters, actuator limits, and the desired motion. Input sha...
متن کامل