Prepration and photoluminescence properties of Ce doped lutetium silicate nanopowders by solegel method

نویسندگان

  • Dae-Yong Shin
  • Guozhong Cao
  • Kyung-Nam Kim
چکیده

Cerium doped lutetium silicate powders were prepared by solegel process with different cerium concentrations (0, 0.01 and 0.03 mol%). The synthesized lutetium silicate powders were investigated by X-ray diffraction (XRD), TG-DTA, SEM, and Photoluminescence excitation and emissions. The crystallization of lutetium silicate is observed at 1.073 C in S2 (and S3: 1.058 C) sample. The formation of lutetium silicate phases was confirmed by XRD analysis for the powders heated at 1.200 C, of which mixed phases containing Lu2SiO5 and Lu2Si2O7 phase were observed. Lutetium silicate powders were homogeneous and constituted of small spherical particles of about 400 nm. Lutetium silicate powder itself was not scintillate, but scintillation yield was higher in Lu2SiO5:Ce3þ powder. Very broad spectra were observed in the range of 350e530 nm, and emission intensity increases at a Ce doping of 0.01%, but

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Bi-functional NaLuF4:Gd3+/Yb3+/Er3+ nanocrystals: hydrothermal synthesis, optical and magnetic properties

Magnetic-fluorescent lanthanide doped sodium lutetium fluoride (NaLuF4:Yb3+/Er3+/Gd3+) nanocrystals were synthesized via facile hydrothermal method by varying concentration of Gd3+. Powder X-ray powder diffraction (PXRD), scanning electron microscopy (SEM),transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), p...

متن کامل

Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method

Titanium dioxide nanoparticles (TiO2) are known as a widely used photocatalyst. In order to improve the performance of these nanoparticles, the recombination of the electron-cavity pair must be reduced and the absorption rate of the visible region should be expanded. One way to increase the performance of these nanoparticles is using cerium doped TiO2. In the present study, pure and doped titan...

متن کامل

Nanopowder Metal Oxide for Photoluminescent Gas Sensing

Gas sensing properties of metal oxide nanopowders (ZnO, TiO2, WO3, SnO2) with average diameters of 40-60 nm were analyzed by room-temperature photoluminescence spectroscopy. The influence of gas environment (O2, N2, H2, CO, CO2) on the emission intensity was investigated for metal oxide nanopowders with surface doped by impurities (Pt, Ag, Au, Sn, Ni or Cu). Established physicochemical regulari...

متن کامل

Structural and optical properties of Cerium doped Calcium Fluoride nanoparticles prepared by copercipitation

Calcium fluoride nanoparticles with special amount of cerium ion (%1) were synthesized by coprecipitation. Fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), absorption and photoluminescence (PL) from CaF2Ce nanoparticles has been investigated. FTIR spectra reveal that there are some amounts of OH, NO3 and other organic functional groups on the parti...

متن کامل

Structural and optical properties of Cerium doped Calcium Fluoride nanoparticles prepared by copercipitation

Calcium fluoride nanoparticles with special amount of cerium ion (%1) were synthesized by coprecipitation. Fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), absorption and photoluminescence (PL) from CaF2Ce nanoparticles has been investigated. FTIR spectra reveal that there are some amounts of OH, NO3 and other organic functional groups on the parti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011