The CO Poisoning Mechanism of the Hydrogen Oxidation Reaction in Proton Exchange Membrane Fuel Cells
نویسندگان
چکیده
The CO tolerance mechanism of the hydrogen oxidation reaction was investigated on several highly dispersed carbon-supported nanocrystalline Pt and binary Pt alloys. For this purpose, current/potential behavior was derived from half-cells under actual proton exchange membrane fuel cell operating conditions and correlated with expressions derived from kinetic models. Kinetic analyses have shown that the CO poisoning effect on Pt/C, PtRu/C, and PtSn/C catalysts occurs through a free Pt site attack mechanism, involving bridgeand linear-bonded adsorbed CO. For all catalysts, the onset of CO oxidation occurs via the bridge-bonded species, but for PtRu/C and PtSn/C, the reaction starts at smaller potentials. Under this condition, the hydrogen oxidation currents are generated on the vacancies of a carbon monoxide adsorbed layer created when some of the bridge-bonded CO molecules are oxidized. The linearly adsorbed CO is oxidized at higher overpotentials, leading to an increase of the holes on the CO layer and thus of the rate of the hydrogen oxidation process. © 2002 The Electrochemical Society. @DOI: 10.1149/1.1473775# All rights reserved.
منابع مشابه
Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells
In the current work, graphene oxide (GO) samples were prepared at room temperature from graphite flakes using a modified Hummer's method to produce metal-free electrocatalysts. The effect of the duration of the oxidation process on the structural, chemical and physical characteristics of the GO samples was evaluated using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ...
متن کاملNovel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells
Proton exchange membrane fuel cells (PEMFCs) are electrochemical devices that show the highest power densities compared to the other type of fuel cell. In this work, nanocomposite membranes used for proton exchange membrane fuel cells as poly(vinyl alcohol)/La2Ce2O7 (PVA-LC) with the aim of increasing the water uptake and proton conductivity. Glutaraldehyde (GA) was used as cross linking agent ...
متن کاملStudies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications
Sulfonated poly (ether ether ketone) (SPEEK) with a low degree of sulfonation (DS = 40%) was prepared for proton exchange membrane fuel cells (PEMFC). Poly (ether ether ketone) (PEEK) was sulfonated in concentrated H2SO4 under N2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (H-NMR) technique. After preparation of the SPEEK polymer, the obtained polymer was dissolved i...
متن کاملThe effect of inclined radial flow in proton exchange membrane fuel cells performance
Computational fluid dynamics analysis was employed to investigate the radial flow field patterns of proton exchange membrane fuel cells (PEMFC) with different channel geometries at high operating current densities. 3D, non-isothermal was used with single straight channel geometry. Our study showed that new generation of fuel cells with circle stack with the same active area and inlet area gave ...
متن کاملElectrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction
Reduced graphene oxide film was synthesized on a glassy carbon electrode by electro reduction of graphene oxide powders in aqueous solution. Then platinum nano particles were deposited on reduced graphene oxide film that was deposited on the glassy carbon electrode via electro reduction of platinum salt. The Physical morphology of the platinum on reduced graphene oxide film was evaluated by sca...
متن کامل