Shunt Compensation Design of Ehv Double- Circuit Mixed Ohl-cable Connections
نویسندگان
چکیده
This paper deals with the shunt compensation design of long 380kV-50Hz XLPE cables by simulating a double-circuit partially cabled connection with the transmission length of 80 km in the Dutch transmission system. The proposed procedure for shunt compensation sizing is fully elaborated in this paper. Four sizing criteria are used to find the minimum required size of compensation. All simulations are performed for different cable lengths. Moreover, different compensation arrangements including line-end and distributed arrangements are compared in terms of minimum required compensation size. Finally, the influence of mixed-line configuration, i.e. the number and the location of cable sections, on the minimum required compensation size is investigated by simulating five mixed-line configurations. All simulations are performed for two load-flow scenarios representing two extreme situations in the future planning of the Dutch transmission grid.
منابع مشابه
Delft University of Technology Shunt Compensation Design of EHV Double-Circuit Mixed OHL-Cable Connections
This paper deals with the shunt compensation design of long 380kV-50Hz XLPE cables by simulating a double-circuit partially cabled connection with the transmission length of 80 km in the Dutch transmission system. The proposed procedure for shunt compensation sizing is fully elaborated in this paper. Four sizing criteria are used to find the minimum required size of compensation. All simulation...
متن کاملTransmission Efficiency Optimization for the operation of double-circuit Overhead Lines
Nowadays the question of improving overhead-line (OHL) operation efficiency is more than ever considered as a very critical issue. This is because power losses have recently acquired an extra cost due to the CO2 release penalty. It is well known that a good portion of the electricity required to operate a power grid is spent as OHL power losses. In this paper the key points of the maximum OHL t...
متن کاملUltra-Widband Distributed Amplifier Using Loss Compensation Technique on Both Input and Output Circuit
In this paper, we analyze a distributed amplifier based on input/output attenuation compensation. The analysis is carried out for a HEMT transistor; and a constant-k section filter is used to calculate the amplifier’s characteristics such as attenuation factor, phase constant and gain. The proposed design approach enables us to examine the tradeoff among the variables, which include the type an...
متن کاملCable Selection and Shunt Compensation for Offshore Windparks
The transmission of the electric power to shore and concepts for the electrical system of offshore wind farms are evaluated with respect to selection of a cable. Necessity of use of a shunt by an AC cable connection to shore is addressed, Consequences of the use of a higher insulation of cables, use of three single core cables in triangular and linear configuration is compared in the paper.
متن کاملDesign of a Single-Layer Circuit Analog Absorber Using Double-Circular-Loop Array via the Equivalent Circuit Model
A broadband Circuit Analogue (CA) absorber using double-circular-loop array is investigated in this paper. A simple equivalent circuit model is presented to accurately analyze this CA absorber. The circuit simulation of the proposed model agrees well with full-wave simulations. Optimization based the equivalent circuit model, is applied to design a single-layer circuit analogue absorber using d...
متن کامل