Self-assembled Ni/TiO2 nanocomposite anodes synthesized via electroless plating and atomic layer deposition on biological scaffolds.
نویسندگان
چکیده
Ni(core)/TiO(2)(shell) nanocomposite anodes were fabricated on three-dimensional, self-assembled nanotemplates of Tobacco mosaic virus using atomic layer deposition, exhibiting high capacities and rate capability and extremely low average capacity fading (∼0.024% per cycle) for ∼1000 cycles.
منابع مشابه
Self-assembled Ni/TiO2 nanocomposite anodes synthesized via electroless plating and atomic layer deposition on biological scaffoldsw
The development of next-generation Li-ion batteries is directly linked with the development of electrode materials and structures with enhanced energy and power density and long cycle life. Nanostructured materials have emerged as a promising solution due to the reduced distances for lithium ion diffusion, structural stability, as well as larger electrode/electrolyte contact area which increase...
متن کاملNovel Electroless Plating of Ruthenium for Fabrication of Palladium-Ruthenium Composite Membrane on PSS Substrate and Its Characterization
This paper focused on a novel method of electroless plating ruthenium (Ru) on solid or porous substrates like porous stainless steel (PSS) discs or ceramic tubes. A novel complexing plating bath of Ru was developed. It is proven that Ru can be deposited directly on these substrates by the bath at a temperature of 328 K and strong alkaline environment. TGA, SEM, EDX and XRD confirmed the success...
متن کاملTiO2 nano-particle effect on the chemical and physical properties of Ni-P-TiO2 nanocomposite electroless coatings
TiO2 nano-particles were used in electroless plating bath to obtain Ni/P/nano-composite coatings. The coatings were heat treated at 200, 400, 600 and 700 oC and their chemical and physical properties were investigated and it was found that 400 oC was the optimum temperature for the heat treatment of the coatings. The micro-hardness test of coatings showed that t...
متن کاملAn Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings
In this research, a sol-modified composite electrodeposition technique that combines the sol-gel method with the conventional electrodeposition process was utilized to deposit Ni-TiO2 nanocomposite coatings. Cyclic voltammetry and chronoamperometry techniques were applied to study the influence of the TiO2 sol concentration on the deposits’ electrochemical behavior. The results clearly showed t...
متن کاملVirus-enabled silicon anode for lithium-ion batteries.
A novel three-dimensional Tobacco mosaic virus assembled silicon anode is reported. This electrode combines genetically modified virus templates for the production of high aspect ratio nanofeatured surfaces with electroless deposition to produce an integrated nickel current collector followed by physical vapor deposition of a silicon layer to form a high capacity silicon anode. This composite s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 46 39 شماره
صفحات -
تاریخ انتشار 2010