International Journal for Numerical Methods in Fluids
نویسندگان
چکیده
FLITE3D is a multigrid Euler solver. It is used extensively by British Aerospace in aircraft design and simulation. This paper presents experiences in parallelizing this industrial code. Owing to the employment of an agglomeration-based multigrid technique, the communication overhead on the coarser meshes could readily erode any gain from the use of parallel computers. The parallelization of the code therefore required careful design and implementation. The strategy adopted in the parallelization of the code, including the use of data structures and communication primitives, is described. Numerical results are presented to demonstrate the efficiency of the resulting parallel code. Copyright © 2001 John Wiley & Sons, Ltd.
منابع مشابه
Experimental Study and Three-Dimensional Numerical Flow Simulation in a Centrifugal Pump when Handling Viscous Fluids
In this paper the centrifugal pump performances are tested when handling water and viscous oils as Newtonian fluids. Also, this paper shows a numerical simulation of the three-dimensional fluid flow inside a centrifugal pump. For these numerical simulations the SIMPLEC algorithm is used for solving governing equations of incompressible viscous/turbulent flows through the pump. The k-ε turbulenc...
متن کاملNumerical Solution of Reacting Laminar Flow Heat and Mass Transfer in Ducts of Arbitrary Cross-Sections for Newtonian and Non-Newtonian Fluids
This study is concerned with the numerical analysis, formulation, programming and computation of steady, 3D conservation equations of reacting laminar flow heat and mass transfer in ducts of arbitrary cross-sections. The non-orthogonal boundary-fitted coordinate transformation method is applied to the Cartesian form of overall-continuity, momenta, energy and species-continuity equations, parabo...
متن کاملApplication of Chimera grid to modelling cell motion and aggregation in a narrow tube.
A computational scheme using the Chimera grid method is presented for simulation of three-dimensional motion and aggregation of two red blood cells (RBCs) in a narrow tube. The cells are modelled as rigid ellipsoidal particles; the computational scheme is applicable to deformable fluid-filled particles. Attractive energy between two RBCs is modelled by a depletion interaction theory and used fo...
متن کاملA Numerical Improvement in Analyzing the Dynamic Characteristics of an Electrostatically Actuated Micro-beam in Fluid Loading with Free Boundary Approach
Electrostatically actuated microbeams have been studied by many researchers in the last few years. The aim of this study is to present an improved numerical analysis of the dynamic instability of a cantilever microbeam immersed in an incompressible viscous fluid. The finite element method is used for solving the vibrational equation of the microbeam and the potential functions of the fluids in ...
متن کاملNumerical Predictions of Turbulent Mixed Convection Heat Transfer to Supercritical Fluids Using Various Low Reynolds Number k-e Turbulence Models
There are a number of systems in which supercritical cryogenic fluids are used as coolants or propellant fluids. In some modern military aircraft, the fuel is pressurized above its critical point and used as a coolant to remove heat from the aircraft engine. Accurate prediction of heat transfer coefficients to turbulent flows of supercritical fluids is essential in design of such systems. One o...
متن کاملNumerical investigation of thermal mixing of shear thinning fluids in one-way opposing jets
In recent years, impinging streams have received increasing interest for their high efficiency in heat and mass transfer. This numerical study was conducted to investigate flow and heat transfer characteristics of one-way opposing jets of non-Newtonian fluids. Effects of Reynolds number impinging angle, momentum ratio and flow behavior index on mixing index were evaluated. The results showed im...
متن کامل