Material removal in the optical polishing of hydrophilic polymer materials
نویسندگان
چکیده
The optical polishing of hydrophilic polymer materials is a complex process that requires a comprehensive setting of various operating parameters. Based on a series of experimental investigations and dimensional analysis, this paper presents a simple empirical equation to evaluate material removal in the polishing of optical spherical surfaces of hydrophilic polymer materials. It is shown that the polishing load applied governs the material removal, the relative sliding velocity and the sliding distance between the workpiece and polishing tool surfaces. The equation also offers a good reference for the setting of the polishing variables. # 2000 Elsevier Science S.A. All rights reserved.
منابع مشابه
Process Chain Modelling and Analysis for Computer Controlled Ultra-precision Polishing of Optical Freeform Surfaces
Computer Controlled Ultra-precision Polishing (CCUP) provides an enabling technology for machining freeform components with optical surface quality (i.e., nanometer surface roughness and sub-micrometer or accuracy). It can be used to machine difficult-to-machine materials such as optical glass which are not amenable for diamond machining. Due to the complexity of material removal mechanism in t...
متن کاملDevelopment of New Magnetorheological Fluids for Polishing CaF2 and KDP
LLE Review, Volume 80 213 Magnetorheological finishing (MRF) is a novel and recently commercialized1 process for figuring and polishing plano, convex, and concave optics—both spherical and aspherical— from a wide variety of optical materials. A recently written review article provides an overview of the history, theory, and implementation of this technology.2 The utility and productivity of MRF...
متن کاملModified Nanoporous Carbon Material for Anionic Dye Removal from Aqueous Solution
In this study, the adsorption behavior of anionic dyes from aqueous solution onto mesoporous carbon material (CMK-1) and modified with polymer (PANI/CMK-1) has been investigated as a function of parameters such as adsorbent dose (0.08-0.8 g/L), solution pH 3–10, contact time and initial concentration (10-100 mg/L). The influence of these parameters on the adsorption capacity has been studied us...
متن کاملExperimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode
Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...
متن کاملExperimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode
Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...
متن کامل