Continuous Shear Roll Milling of Gun Propellants
نویسنده
چکیده
The continuous shear roll milling can be used for the processing and granulation of gun propellants. Here a mathematical model of the continuous shear roll milling process will be presented along with experimental data collected on live and simulant propellant formulations. The role of the flow boundary condition will be shown to be critical in the processability analysis. The safety aspects will be discussed under the light of the modeling and experimental results.
منابع مشابه
پایداری بالستیکی پیشرانه های تفنگی (علمی-ترویجی)
Generally, storage long time gun propellants cause negative ballistic effects. thus, retain ballistic stability of gun propellants during storage is one of the requirement new gun propellants. in this paper, deals with the ballistic stability conventional and new gun propellants. Therewithal, effective factors on ballistic stability and changing ballistic parameters (muzzle velocity & peak pres...
متن کاملاستخراج ضرایب نرخ سوزش پیشرانه تفنگی بر اساس داده های تست محفظه بسته
When dealing with research and development of gun propellants, a less expensive, quicker and safer process of closed vessel evaluation adopted rather than gun firing. In the current research work a computer program (BRCBADR) has been developed for the burning rate reduction from closed vessel test data. Correct determination of thermo-chemical properties of propellants provides accurate results...
متن کاملInvestigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process
In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...
متن کاملInvestigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process
In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...
متن کاملThe Use of Positron Emission Pa Rticle Tracking ( Pep T ) to 1 Study Milling of Roll - Compacted Microcystalline 2 Cellulose Ribbons 3
13 Milling is a critical process for controlling the properties of the granules produced by roll 14 compaction. In the current study, the positron emission particle tracking (PEPT) technique was 15 used to examine the milling kinematics of roll compacted ribbons at various milling speeds. 16 Microcrystalline cellulose (MCC, Avicel PH-102) was used as the model feed material and a 17 radioactive...
متن کامل