An electrothermal carbon nanotube gas sensor.
نویسندگان
چکیده
We show both gas pressure and species sensing capabilities based on the electrothermal effect of a multiwalled carbon nanotube (MWCNT). Upon exposure to gaseous environments, the resistance of a heated MWCNT is found to change following the conductive heat-transfer variances of gas molecules. To realize this mechanism, a suspended MWCNT is constructed by synthesis and assembly in localized chemical vapor deposition that is accomplished within seconds via real-time electrical feedback control. Vacuum pressure sensitivity and gas species differentiability are observed and analyzed. Such MWCNT electrothermal sensors are compact, fast and reversible in responses, and fully integratable with microelectronics.
منابع مشابه
Controlled fabrication of carbon nanotube NO2 gas sensor using dielectrophoretic impedance measurement
The authors have previously demonstrated an electrokinetic fabrication method of a carbon nanotube (CNT) gas sensor using dielectrophoresis. One advantage of the technique was that one could quantify the amount of trapped nanotubes on a real time basis by monitoring electrical impedance of the sensor (dielectrophoretic impedance measurement, DEPIM). In the present study, we extended the DEPIM t...
متن کاملA Wearable and Wireless Gas-Sensing System Using Flexible Polymer/Multi-Walled Carbon Nanotube Composite Films
In this study, an integrated flexible gas sensor was developed based on a polymer/multiwalled carbon nanotube composite film by using Bluetooth wireless communication/interface technology. Polymer/multi-walled carbon nanotube composite films were deposited over a polyimide flexible substrate for building a gas sensor array by using a drop-casting method. Sensor response was acquired through int...
متن کاملElectrochemical Sensor for the Determination of Alizarin Red-S at Non-ionic Surfactant Modified Carbon Nanotube Paste Electrode
The Cyclic Voltammetric (CV) behavior of Alizarin Red-S (ARS), which is an Anthraquinone dye was examined by utilizing TX-100 modified carbon nanotube paste electrode (TX-100MCNTPE). The surfactant utilized is TX-100, and it has been found that it has good electrocatalytic activity towards ARS. Distinctive parameters like pH, scan rate, detection limit have been studied in the potential range o...
متن کاملThe structure optimization of the carbon nanotube film cathode in the application of gas sensor
The carbon nanotube (CNT) film is used to fabricate the novel carbon nanotube film cathode (CNTFC) gas sensor, and the working voltage of the novel sensor at atmospheric pressure decreases to several hundred volts from the value of more than thousand volts of the traditional discharge gas sensor, however it is limited by that the space charge in the gap is very hard to diffuse after the breakdo...
متن کاملA Wireless, Passive Carbon Nanotube-Based Gas Sensor
A gas sensor, comprised of a gas-responsive multiwall carbon nanotube (MWNT)—silicon dioxide (SiO2) composite layer deposited on a planar inductor-capacitor resonant circuit is presented here for the monitoring of carbon dioxide (CO2), oxygen (O2), and ammonia (NH3). The absorption of different gases in the MWNT-SiO2 layer changes the permittivity and conductivity of the material and consequent...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nano letters
دوره 7 12 شماره
صفحات -
تاریخ انتشار 2007