Computer Simulation of Forging Using the Slab Method Analysis
نویسندگان
چکیده
Abstract— Forging is a very complex process and the measurement of actual forces for real material is difficult and cumbersome. The main objective of this document is to use the analytical methods for measuring parameters such as load, and stress distribution of forging process and use them to make simple, reliable, fast and non-expensive simulation tools, contrary to the commercial software’s which require much means, time and a perfect knowledge of the process. Of the various methods used for analysing forging operations, the most often used SLAB method techniques are described here.
منابع مشابه
Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process
Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles and also for creating internal profiles such as rifling the gun barrels. The radial forging of tube is usually performed over a mandrel to create an internal profile and/or size the internal diameter. Most of the previous studies conducted on the radial forging process have u...
متن کاملThe Simulation and Experimental Investigation to Study the Strain Distribution Pattern during the Closed Die Forging Process
Abstract—Closed die forging is a very complex process, and measurement of actual forces for real material is difficult and time consuming. Hence, the modelling technique has taken the advantage of carrying out the experimentation with the proper model material which needs lesser forces and relatively low temperature. The results of experiments on the model material then may be correlated with t...
متن کاملOptimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
In a closed die forging process, it is impossible to form complex shapes in one stage, and thus it becomes necessary to use preform dies. In the present study, Backward Deformation Method and FE simulation via ABAQUS software has been used in order to design preform die of the H-shaped parts. In the Backward Deformation Method, the final shape of the part is considered as a starting point and u...
متن کاملThe Review Study of Forging and Effects on the Produced Part
There are several method for forming bulk material, such as forging, rolling and extrusion. Every of these methods have advantages and dis-advantages of their selves. Forging process is one of the most common of them that include a die, press and in some case heater with controlling system, and has a special place in automotive, military and aerospace industries due uniformity of the final prod...
متن کاملOptimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
In a closed die forging process, it is impossible to form complex shapes in one stage, and thus it becomes necessary to use preform dies. In the present study, Backward Deformation Method and FE simulation via ABAQUS software has been used in order to design preform die of the H-shaped parts. In the Backward Deformation Method, the final shape of the part is considered as a starting point and u...
متن کامل