Analysis and Synthesis of Fixturing Dynamic Stability in Machining Accounting for Material Removal Effect
نویسندگان
چکیده
for their love and support. iv ACKNOWLEDGEMENTS I would like to express my deepest gratitude to my advisor Dr. Shreyes N. Melkote for his guidance and support during the course of this thesis research. Without his trust, encouragement, and patience, I would be unable to finish this thesis. I extend my deep appreciation to Dr. advanced knowledge of dynamics and vibrations, which was very helpful to this thesis. (PMRC) for their friendship and useful discussions on various research topics. I give my special thanks to David M. Breland for his assistance in the experimental work reported in this thesis. I extend my appreciation to Steven Sheffield, John Morehouse, and other staff members in the PMRC for their support in my thesis research and Ph.D. study. for their love and support throughout my graduate studies.
منابع مشابه
Mathematical Modeling and Analysis of Spark Erosion Machining Parameters of Hastelloy C-276 Using Multiple Regression Analysis (RESEARCH NOTE)
Electrical discharge machining has the capability of machining complicated shapes in electrically conductive materials independent of hardness of the work materials. This present article details the development of multiple regression models for envisaging the material removal rate and roughness of machined surface in electrical discharge machining of Hastelloy C276. The experimental runs are de...
متن کاملModeling Cutting Process Nonlinearity for Stability Analysis — Application to Tooling Selection for Valve-Seat Machining
1 INTRODUCTION Machining stability, or instability, is a product of the coupling of the machine-tool system structure and the machining process. Efforts to avoid instability/chatter problems during the design of a machine tool often focus on the structure by increasing stiffness and or damping in its various elements, such as the machine tool, fixturing and tooling. Increasing dynamic stiffness...
متن کاملVariable Clamping Force Control for an Inteligent Fixturing
An Intelligent Fixturing System (IFS) is currently being developed to hold a family of thin-walled workpieces for machining operations. This is a cost-effective system which uses off-line optimisation of the clamps location and on-line adjustment of clamping forces. As adaptive clamping forces appropriate to the dynamic machining environment are employed, the IFS offers higher quality of machin...
متن کاملOptimization of Material Removal Rate in Electrical Discharge Machining Alloy on DIN1.2080 with the Neural Network and Genetic Algorithm
Electrical discharge machining process is one of the most Applicable methods in Non-traditional machining for Machining chip in Conduct electricity Piece that reaching to the Pieces that have good quality and high rate of machining chip is very important. Due to the rapid and widespread use of alloy DIN1.2080 in different industry such as Molding, lathe tools, reamer, broaching, cutting guillot...
متن کاملThe Effect of Electrical Discharge Machining Parameters on Alloy DIN 1.2080 Using the Taguchi Method and Optimal Determinant
Electrical discharge machining process, is one of the most widely used methods for machining, the electrically conductive parts. In this way the tool is not in contact with the workpiece and the hardness of workpiece does not affect the machining speed. In Electrical Discharge Machining process, selection of the correct machining parameters are effective in final cost and the quality of the pro...
متن کامل