Analysis and Design of a Novel Leaky YIG Film Guided Wave Optical Isolator

نویسندگان

  • Vishnu Priye
  • Bishnu P. Pal
  • K. Thyagarajan
چکیده

A guided wave optical isolator using a four layered leaky yttrium iron garnet (YIG) waveguide with a YIG guiding layer is proposed and analyzed through a transfer matrix formulation. The dependence of isolation characteristics on different waveguide parameters are discussed. It is shown that for four layered structures an isolation ratio of about 24 dB can be achieved with YIG films having large gyrotropy. It is also shown that by replacing the single guiding YIG film with multilayers of YIG with compensated walls and proper permittivity, high isolation ratio can be achieved even with currently available YIG films having low gyrotropy.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication and characterization of As2S3/Y3Fe5O12 and Y3Fe5O12/SOI strip-loaded waveguides for integrated optical isolator applications

We report two novel strategies to integrate magneto-optical oxides on oxidized silicon and SOI platforms based on strip-loaded waveguide structures. By using conventional waveguide fabrication and thin film deposition techniques, strip-loaded waveguides for magneto-optical non-reciprocal phase shift (NRPS) applications can be integrated on a silicon platform. As a demonstration, two structures,...

متن کامل

Single-Step Deposition of Cerium-Substituted Yttrium Iron Garnet for Monolithic On-Chip Optical Isolation

Photonic integrated circuits require magneto-optical (MO) materials for making nonreciprocal devices such as isolators and circulators. The most successful MO materials are rare-earth-substituted iron garnets, but these can be challenging to grow on silicon without a seed layer, which introduces spacing loss between the waveguide and the MO cladding. A pulsed-laser deposition (PLD) method is us...

متن کامل

Simulation and Design of an Organic Quantum Film Electrooptic Switch

In this paper the simulation and design of a quantum-film electro-optic switch is considered. This photonic device, is made from a new organic dipolar material called MNA or 2-methyl-4 nitroaniline, which possesses a high merit in comparison with it's inorganic counterparts (e.g. LiNbO3, GaAs, InSb, Quartz, etc). Montecarlo method is used to simulate the photon-it-electron interaction in this m...

متن کامل

On-chip optical isolation in monolithically integrated non-reciprocal optical resonators

Non-reciprocal photonic devices, including optical isolators and circulators, are indispensible components in optical communication systems. However, the integration of such devices on semiconductor platforms has been challenging because of material incompatibilities between semiconductors and magneto-optical materials that necessitate wafer bonding, and because of the large footprint of isolat...

متن کامل

An optical leaky wave antenna with silicon perturbations for electronic control

An optical leaky wave antenna (OLWA) is a device that radiates a light wave into the surrounding space from a leaky wave (LW) guided mode or receives optical power from the surrounding space into a guided optical mode. In this work, we propose and provide a 3D analysis of a novel CMOS compatible OLWA made of a silicon nitride (Si3N4) waveguide comprising periodic silicon perturbations which all...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006