A Simulation Study of an Industrial Methanol Reactor Based on Simplified Steady-state Model
نویسنده
چکیده
Methanol is recognized as a potential renewable energy source for its uses in gasoline blending and direct methanol fuel cells. This work aims to develop a simulation model that can adequately represent and industrial real-life methanol reactor from a petrochemical plant at steady-state conditions. The main purpose is to provide a tool for investigating the effects of inlet temperatures, coolant inlet temperatures and velocity on the reactor’s performance under steady-state conditions. From the results obtained, it is revealed that the simplified model is able to approximate the plant’s operating conditions with sufficient accuracy of less than 5% error. The validated model allows a better temperatures, feed superficial velocities and coolant inlet temperatures. This model can serve as a base for future improvement studies on the said reactor.
منابع مشابه
AN EQUATION ORIENTED APPROACH TO STEADY STATE FLOWSHEETING OF METHANOL SYNTHESIS LOOP
An equation-oriented approach was developed for steady state flowsheeting of a commercial methanol plant. The loop consists of fixed bed reactor, flash separator, preheater, coolers, and compressor. For steady sate flowsheeting of the plant mathematical model of reactor and other units are needed. Reactor used in loop is a Lurgi type and its configuration is rather complex. Previously reactor ...
متن کاملSteady State Operability Characteristics of an Adiabatic Fixed-Bed Reactor for Methanol Dehydration
Operability analysis as one of the most important bridges between process design and process control helps the process designer to investigate the control issues quite early in the design stage. Recently, Vinson and Georgakis suggested a steady state geometrical operability index as a quantitative measure for assessment of process operability. In...
متن کاملSimulation and Control of a Methanol-To-Olefins (MTO) Laboratory Fixed-Bed Reactor
In this research, modeling, simulation, and control of a methanol-to-olefins laboratory fixed-bed reactor with electrical resistance furnace have been investigated in both steady-state and dynamic conditions. The reactor was modeled as a one-dimensional pseudo-homogeneous system. Then, the reactor was simulated at steady-state conditions and the effect of different parameters including...
متن کاملCFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor
A computational fluid dynamic (CFD) study of methanol (MeOH) to dimethyl ether (DME) process in an adiabatic fixed-bed reactor is presented. One of the methods of industrial DME production is the catalytic dehydration of MeOH. Kinetic model was derived based on Bercic rate. The parameters of this equation for a specific catalyst were tuned by solving a one-dimensional homogenous model using MAT...
متن کاملSimulation and Optimization of a Naphtha Thermal Cracking Pilot Plant
In thermal cracking plants, it is desired to apply an optimal temperature profile along the reactor to minimize the operation cost. In this article a simulator is developed by the use of a mathematical model, which describes the static operation of a naphtha thermal cracking pilot plant. The model is used to predict the steady state profiles of the gas temperature and product yields. Using ...
متن کامل