Goniospectral Imaging of 3D Objects
نویسندگان
چکیده
A multiband imaging system with multi-angle illumination and a processing algorithm for multiband images acquired by the system are presented for extracting goniospectral information of 3D objects. Based on a dichromatic reflection model, multiband images are separated into diffuse and specular components. Then, the model parameters are determined pixelwise and archived. Using these parameters, an image of the 3D object under an arbitrary spectral and spatial distribution of illuminant can be predicted and displayed. A fundamental experiment to confirm the principle of this method is presented.
منابع مشابه
Design and Manipulation 3D Imaging System by using Photodiode Grid
Introduction: Radiation imaging is one of the applicable methods in diagnostic medicine and nondestructive testing for industrial applications. In nondestructive 3D imaging, in addition to the radiation source, there is a requirement for a suitable detection system, data acquisition system, mechanical sections for moving objects, reconstruction algorithm and finally a computer for processing an...
متن کاملGoniospectral Imaging of Three-Dimensional Objects
2 We propose a method for extracting goniospectral information of three-dimensional objects from multiband images obtained under several illuminants and reproducing the objects under various kinds of illuminants. Using the dichromatic reflection model, goniophotometric information of both diffuse component and specular component is estimated from the images acquired under the illuminant from se...
متن کاملColor and Glossiness Reproduction of 3D Object Surface
The method proposed for extracting goniospectral information of 3D objects is reformulated in more exact form. Especially the illumination direction is expressed in both azimuthal and elevation angle. It is shown that extending the range of illumination direction to two dimension leads to provide useful model parameters including the surface normal of the object. Experimental results of the dis...
متن کامل3D Modelling of Under Ground Burried Objects Based on Ground Penetration Radar
There is a growing demand for mapping and 3D modelling of buried objects such as pipelines, agricultural hetitage, landmines and other buried objects. Usually, large scale and high resolution maps from these objects are needed. Manually map generation and modeling of these objects are cost and time consuming and is dependent on lots of resources. Therefore, automating the subsurface mapping and...
متن کاملکاربرد چاپگر سهبعدی در بازسازی اشیای تاریخی شیشهای
Three-dimensional tools are widely used for various purposes, particularly Three- dimensional printers which play a great role in simplification and acceleration of phases in production process for various fields ranging from medicine to industry. Due to the problems related to the reconstruction of missing parts in restoration of historic glass objects in the methods of molding, casting and f...
متن کامل