Thermal Plasma Generators with Water Stabilized Arc
نویسنده
چکیده
Electric arc stabilized by a vortex of liquid, mostly water, is used in a special type of plasma torch for generation of thermal plasma jet with extreme plasma parameters. The paper presents analysis of properties and processes of water stabilized arcs and discusses differences from common gas stabilized arcs. Plasma torch utilizing stabilization of arc column by combination of gas flow and liquid vortex is described and its properties are presented.
منابع مشابه
A comparative numerical study of hybrid-stabilized argon-water electric arc
The so-called hybrid stabilized electric arc utilizes a combination of gas and vortex stabilization. In the hybrid argon-water plasma torch, the arc chamber is divided into the short cathode part, where the arc is stabilized by tangential argon flow, and the longer part, which is stabilized by water vortex. This arrangement provides not only the additional stabilization of the cathode region an...
متن کاملOperational Parameters of Thermal Water Vapor Plasma Torch and Diagnostics of Generated Plasma Jet
The operational characteristics of the experimental direct current plasma torch with water vapor stabilization of the arc discharge and diagnostics of generated plasma jet at the nozzle exhaust of the torch were studied in this research. The operation parameters of the torch are presented in terms of generalized thermal and electrical characteristics, which were compared with equations for stea...
متن کاملComparative Study of Plasma Sprayed Yittria and Ceria Stabilized Zirconia Properties
Thermal Barrier Coatings are subjected to spallation and destabilization due to hot corrosion.Recently, Ceria Stabilized Zirconia (CSZ)-based TBCs have been intensively investigated for the YSZreplacement because CSZ has a much lower thermal conductivity and a higher expected thermalexpansion coefficient than those of YSZ. In this research, Yttria stabilized zirconia (YSZ) andceria stabilized z...
متن کاملPlasma Engineering in Metallurgy and Inorganic Materials Technology
An account is presented of the work done in the USSR on the generation of thermal plasma, plasma melting, and plasma jet processes. The various methods of plasma generation are reviewed, such as arc plasma generators and high frequency (HF) plasma generators including HF-induction plasmatrons, HF-capacity plasmatrons and HF-flame plasmatrons. Plasma melting techniques covered include plasma-arc...
متن کاملPlasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کامل