The in-situ TEM Study of Microstructure Alteration of MoS2 under Carburization
نویسندگان
چکیده
Conversional hydrotreating catalysts mostly use Ni-promoted MoS2 as active sites. Modifying conventional hydrotreating catalyst surface of MoS2 by selectively introducing carbon atom into catalyst crystal structure can lead to an improved electronic property, increased capability of hydrogen adsorption and dissociation. Such process will effectively increase catalyst hydrogenation activity and selectivity [1].
منابع مشابه
In-Situ Polymerization of UHMWPE Using Bi-Supported Ziegler-Natta Catalyst of MoS2 Oxide/MgCl2 (Ethoxide Type)/TiCl4/TiBA: Study of Thermo-Mechanical Properties of System
The use of UHMWPE has attracted the attention of many researchers and industries. The aim of the present work is to fabricate UHMWPE/MoS2-Oxide nano-composites using in-situ polymerization. For this purpose, modified molybdenum disulfide was used. In order to perform the polymerization, a Ziegler-Natta catalytic system, with MoS2-Oxide and magnesium Ethoxide as support, was used. In order to fa...
متن کاملThe role of carburization temperature on the molybdenum carbide surface and their catalytic activity
The surfaces of molybdenum carbide were varied by changing the carburization temperature between 823 and 1123 K. The surfaces of the catalytic material were investigated using in-situ temperature program carburization followed by temperature program reduction and oxidation. In-situ temperature program oxidation (TPO) showed the surfaces of the catalysts contain a similar amoun...
متن کاملThe tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering
In industrial applications, most materials are exposed to wear and friction because multiple conditions are used. However, the tribological properties of these materials can be improved with different techniques. One such technique that improves the frictional property of a surface is the use of self-lubricating coatings. In this study, multicomponent coatings of nominal composition Cu-Ni3Al-Mo...
متن کاملElasticity of MoS2 Sheets by Mechanical Deformation Observed by in Situ Electron Microscopy
MoS2 has been the focus of extensive research due to its potential applications. More recently, the mechanical properties of MoS2 layers have raised interest due to applications in flexible electronics. In this article, we show in situ transmission electron microcsopy (TEM) observation of the mechanical response of a few layers of MoS2 to an external load. We used a scanning tunneling microscop...
متن کاملFabrication of Graphene/MoS2 Nanocomposite for Flexible Energy Storage
In the present work,MoS2 decorated graphene nanocomposite powders were synthesized by laser scribing method.Theobtainedflexible light-scribed graphene/MoS2composites are very suitableas micro-supercapacitors and thus their performance was evaluated at different concentrations.The effect of laser scribing process to reducegraphene oxide (GO) was investigated. The GO/MoS2composite wassynthesized ...
متن کامل