Biomechanical evaluation of DTRAX® posterior cervical cage stabilization with and without lateral mass fixation
نویسندگان
چکیده
INTRODUCTION Lateral mass screw (LMS) fixation with plates or rods is the current standard procedure for posterior cervical fusion. Recently, implants placed between the facet joints have become available as an alternative to LMS or transfacet screws for patients with cervical spondylotic radiculopathy. The purpose of this study was to evaluate the biomechanical stability of the DTRAX(®) cervical cage for single- and two-level fusion and compare this to the stability achieved with LMS fixation with rods in a two-level construct. METHODS Six cadaveric cervical spine (C3-C7) specimens were tested in flexion-extension, lateral bending, and axial rotation to ±1.5 Nm moment without preload (0 N) in the following conditions: 1) intact (C3-C7), 2) LMS and rods at C4-C5 and C5-C6, 3) removal of all rods (LMS retained) and placement of bilateral posterior cages at C5-C6, 4) bilateral posterior cages at C4-C5 and C5-C6 (without LMS and rods), and 5) C4-C5 and C5-C6 bilateral posterior cages at C4-C5 and C5-C6 with rods reinserted. RESULTS Bilateral posterior cervical cages significantly reduced range of motion in all tested directions in both single- and multilevel constructs (P<0.05). Similar stability was achieved with bilateral posterior cages and LMS in a two-level construct: 0.6°±0.3° vs 1.2°±0.4° in flexion-extension (P=0.001), (5.0°±2.6° vs 3.1°±1.3°) in lateral bending (P=0.053), (1.3°±1.0° vs 2.2°±0.9°) in axial rotation (P=0.091) for posterior cages and LMS, respectively. Posterior cages, when placed as an adjunct to LMS, further reduced range of motion in a multilevel construct (P<0.05). CONCLUSION Bilateral posterior cages provide similar cervical segmental stability compared with a LMS and rod construct and may be an alternative surgical option for select patients. Furthermore, supplementation of a lateral mass construct with posterior cages increases cervical spine stability in single- and multilevel conditions.
منابع مشابه
Biomechanical analysis of transpedicular screw fixation in the subaxial cervical spine.
STUDY DESIGN An in vitro biomechanical study to compare 2 different dorsal screw fixation techniques in the cervical spine with respect to primary stability and stability after cyclic loading. OBJECTIVES To investigate if the biomechanical stability is better in pedicle screw or in lateral mass fixation. SUMMARY OF BACKGROUND DATA In patients with poor bone quality who require multisegmenta...
متن کاملBiomechanical evaluation of a novel cervical spine posterior fixation technique using C1 arch screws: An in-vitro cadaveric stu
INTRODUCTION: The complex anatomy and biomechanics of the atlanto-axial motion segment impose technical challenges in the achievement of safe and successful surgical stabilization and fusion. The coauthors have recently reported successful clinical results using a novel C1-C2 stabilization technique employing C1 multi-axial posterior arch screws (MA-PAS) in a series of 3 patients (see Fig.1a-c)...
متن کاملBiomechanical evaluation of immediate stability with rectangular versus cylindrical interbody cages in stabilization of the lumbar spine
BACKGROUND Recent cadaver studies show stability against axial rotation with a cylindrical cage is marginally superior to a rectangular cage. The purpose of this biomechanical study in cadaver spine was to evaluate the stability of a new rectangular titanium cage design, which has teeth similar to the threads of cylindrical cages to engage the endplates. METHODS Ten motion segments (five L2-3...
متن کاملCombined laminoplasty with posterior lateral mass plate for unstable spondylotic cervical canal stenosis--technical note.
A technique of combined expanding laminoplasty using longitudinal interspinous iliac bone graft with posterior lateral mass plate is described for the treatment of cervical canal stenosis associated with spinal instability. A 52-year-old male and a 76-year-old female presented with cervical myelopathy. Imaging studies demonstrated spondylotic cervical canal stenosis associated with spinal insta...
متن کاملBiomechanical comparison of a novel transoral atlantoaxial anchored cage with established fixation technique - a finite element analysis
BACKGROUND The transoral atlantoaxial reduction plate (TARP) fixation has been introduced to achieve reduction, decompression, fixation and fusion of C1-C2 through a transoral-only approach. However, it may also be associated with potential disadvantages, including dysphagia and load shielding of the bone graft. To prevent potential disadvantages related to TARP fixation, a novel transoral atla...
متن کامل