Cleaving of microstructured polymer optical fibres
نویسندگان
چکیده
The issue of how best to cleave PMMAmicrostructured polymer optical fibres (mPOF) is addressed. The impact of the following parameters on the cleaving process is considered: (i) temperature of the cutting blade, (ii) temperature of the platen holding the fibre, (iii) time allowed for thermal equilibration between fibre and platen, (iv) blade speed, and (v) blade condition. The strong influence of a temperature-dependent phase transition in the polymer on the cleaving process is established. Optically acceptable mPOF end-faces can be achieved but only over a limited range of cleavage conditions. 2005 Elsevier B.V. All rights reserved.
منابع مشابه
Future Directions for Microstructured Polymer Optical Fibres
Microstructured Polymer Optical Fibres [MPOF] were first made in 2001, and subsequent development has aimed at exploiting the material and design opportunities they present. Most effort has been focused on developing approaches for high bandwidth MPOF, and investigating the properties of multimode microstructured fibres. We also consider new applications in endoscopy and photonic interconnects,...
متن کاملMICROSTRUCTURED POLYMER OPTICAL FIBRES -the exploration of a new class of fibres-
Progress on microstructured polymer optical fibres (MPOFs), a new class of polymer fibres that were developed last year, will be presented, including various single-mode MPOFs, highly birefringent MPOF, twin-core MPOF, nonlinear MPOF, graded-index MPOF and hollow core MPOF, the latter case being where light is guided in an air core.
متن کاملNew Possibilities with Microstructured Polymer Optical Fibres
Progress on microstructured polymer optical fibres (MPOFs), a new class of polymer fibres that were developed last year, will be presented, including single-mode MPOF, highly birefringent MPOF, twin-core MPOF, graded-index MPOF, ring-structured MPOF and photonic band gap MPOF, the latter case being where light can be guided in an air core.
متن کاملCharacteristics of Multimode Microstructured POF Performance
Commercial acceptance of microstructured polymer optical fibres (MPOFs) is dependent on their delivery of an acceptable combination of loss and bandwidth. This paper describes recent advances in one attempt at quantifying multimode MPOF performance with a view to developing various graded index MPOFs (GIMPOFs) using structures made up of either air or polymer-filled holes.
متن کاملSolution doping of microstructured polymer optical fibres.
Solution doping of microstructured polymer optical fibres [mPOF] is demonstrated, a technique which allows dopants to be introduced after polymerisation through the microstructure. Controlled diffusion is used to disperse the dopant uniformly across the fibre core, and the final concentration can be systematically varied by appropriate choice of conditions. We use this technique to produce a fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005