Adherence of Streptococcus mutans to Fiber-Reinforced Filling Composite and Conventional Restorative Materials

نویسندگان

  • Lippo V.J Lassila
  • Sufyan Garoushi
  • Johanna Tanner
  • Pekka K Vallittu
  • Eva Söderling
چکیده

OBJECTIVES.: The aim was to investigate the adhesion of Streptococcus mutans (S. mutans) to a short glass fibers reinforced semi-IPN polymer matrix composite resin. The effect of surface roughness on adhesion was also studied. For comparison, different commercial restorative materials were also evaluated. MATERIALS AND METHODS.: Experimental composite FC resin was prepared by mixing 22.5 wt% of short E-glass fibers, 22.5 wt% of IPN-resin and 55 wt% of silane treated silica fillers using high speed mixing machine. Three direct composite resins (Z250, Grandio and Nulite), resin-modified glass ionomers (Fuji II LC), amalgam (ANA 2000), fiber-reinforced composite (FRC) (everStick and Ribbond), and pre-fabricated ceramic filling insert (Cerana class 1) were tested in this study. Enamel and dentin were used as controls. The specimens (n=3/group) with or without saliva were incubated in a suspension of S. mutans allowing initial adhesion to occur. For the enumeration of cells on the disc surfaces as colony forming units (CFU) the vials with the microbe samples were thoroughly Vortex-treated and after serial dilutions grown anaerobically for 2 days at +37 degrees C on Mitis salivarius agars (Difco) containing bacitracin. Bacterial adhesion was also evaluated by using scanning electron microscopy. Surface roughness (Ra) of the materials was also determined using a surface profilometer. All results were statistically analyzed with one-way analysis of variance (ANOVA). RESULTS.: Composite FC resin and other commercial restorative materials showed similar adhesion of S. mutans, while adhesion to dentin and enamel was significantly higher (p<0.05). Surface roughness had no effect on bacterial adhesion. Saliva coating significantly decreased the adhesion for all materials (p<0.05). Composite FC resin had a significantly higher Ra value than control groups (p<0.05). CONCLUSIONS.: Short fiber-reinforced composite with semi-IPN polymer matrix revealed similar S. mutans adhesion than commercial restorative materials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

In Vitro Comparison of the Effect of Nano-Hybrid Composite Resin and Amalgam on the Adhesion of Streptococcus Mutans

Background and Aim: Due to the increasing use of restorative materials, finding a suitable material with low adhesion rate and colonization of pathogenic Streptococcus mutans has a significant importance. The purpose of this study was the comparison of the adhesion rate of Streptococcus mutans to &ldquo;Nano-hybrid composite&rdquo; and &ldquo;Amalgam&rdquo; at 1, 3, and 7 day intervals. Method...

متن کامل

Effect of two prophylaxis methods on adherence of Streptococcus mutans to microfilled composite resin and giomer surfaces.

OBJECTIVES Surface attributes of a restoration play an important role in adherence of plaque bacteria. Prophylaxis methods may be involved in modification of or damaging the restoration surface. The aim of the present study was to evaluate the effect of two prophylaxis methods on adherence of Streptococcus mutans to the surface of two restorative materials. STUDY DESIGN A total of 60 specimen...

متن کامل

Comparison of Antibacterial Activity of Self-adhesive Flowable Composite, Microhybrid Flowable Composite and Self-curing Glass Ionomer Against Streptococcus Mutans: An In Vitro Study

Background and purpose: Antibacterial properties of restorative materials are of great advantage as they control the progression of tooth decay. The use of self-adhesive composite materials has some benefits such as easier application and reduced treatment time. Because the antibacterial properties of restorative materials can play an important role in preventing secondary decay, especially in ...

متن کامل

Comparative Evaluation of the Antimicrobial Properties of Glass Ionomer Cements with and without Chlorhexidine Gluconate

BACKGROUND Chlorhexidine gluconate is a widely used antimicrobial agent. Adding chlorhexidine and quaternary ammonium compounds to filling materials, such as composite resins, acrylic resins, and glass ionomer cements increases the antibacterial property of restorative materials. This study includes antibacterial property of glass ionomer restorative cements with chlorhexidine gluconate. AIM ...

متن کامل

Comparison of the Bond Strength of Fiber-Reinforced Composite (FRC) Posts to Radicular Dentin Using Different Adhesive Cement: an in-vitro study

Introduction: Retention of fiber reinforced composite posts depends on the bond strength between post and cement, and cement and root dentin. The aim of this study is to evaluate the bond strength of one type of fiber post to radicular dentin with different adhesive cements. Materials and Methods: Crowns of 44 caries-free, human premolar were removed 2 mm below the CEJ and the roots were endod...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 3  شماره 

صفحات  -

تاریخ انتشار 2009