Polarized backlight based on selective total internal reflection at microgrooves.

نویسندگان

  • Ko-Wei Chien
  • Han-Ping D Shieh
  • Hugo Cornelissen
چکیده

A polarized backlight for LCD illumination is designed and fabricated in which s-polarized light is extracted owing to selective total internal reflection at microstructures in the anisotropic layer. From the measurement, the contrast ratio in normal viewing direction can be as high as 64. Luminous uniformity of higher than 80% is achieved for polarized backlights. Furthermore, 1.6 gain in efficiency is obtained aiming for high-efficiency LCD illumination.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Enhancing LCD Optical Efficiency with a Linearly Polarized Backlight and Polarization-preserving Light Guide Plate

We propose a new polarization-preserving edge-lit light guide plate (LGP) based on total internal reflection. Our simulation results show that such a LGP exhibits several attractive features: 1.54X higher polarization efficiency, 2.4X higher on-axis luminance, and no need for a brightness enhancement film. When integrated with a linearly polarized LED array, the LCD optical efficiency can be en...

متن کامل

LED backlight designs with the flow-line method.

An LED backlight has been designed using the flow-line design method. This method allows a very efficient control of the light extraction. The light is confined inside the guide by total internal reflection, being extracted only by specially calculated surfaces: the ejectors. Backlight designs presented here have a total optical efficiency of up to 80% (including Fresnel and absorption losses) ...

متن کامل

Optical phase measurement emphasized

In undergraduate optics laboratory, one thing that is not easily achieved is quantitative measurement of optical phase. The reason is that optical phase measurement usually requires expensive interferometers. We demonstrate measurement of relative optical phase shift upon total internal reflection. Total internal reflection, though known by every student of optics, is remembered by 100% reflect...

متن کامل

A Thin Layer Imaging with the Total Internal Reflection Fluorescence Microscopy

Total internal reflection fluorescence microscopy (TIRFM) is an optical technique that allows imaging of a thin layer of the sample with a thickness of about 100-200 nm. It is used in science of cell biology to study cellular processes, especially near the membranes of living cells. This method is based on the total internal reflection phenomenon, where the evanescent wave is generated in the l...

متن کامل

Small-Angle Measurement of Laser Beam Steering Based on Total Internal-Reflection Effect

A precision small-angle measurement system is introduced based on optical total internal reflection effect. When the incident angle of a polarized beam is larger than the critical angle, and the beam has a small steering angle in the vicinity of the critical angle, the total internal reflection will take place and a relative phased shift between the sand the p-polarized components is produced. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Applied optics

دوره 43 24  شماره 

صفحات  -

تاریخ انتشار 2004