Cyclic plasticity and shakedown in high-capacity electrodes of lithium-ion batteries

نویسندگان

  • Laurence Brassart
  • Kejie Zhao
  • Zhigang Suo
چکیده

Of all materials, silicon has the highest capacity to store lithium, and is being developed as an electrode for lithium-ion batteries. Upon absorbing a large amount of lithium, the electrode swells greatly, with a volumetric change up to 300%. The swelling is inevitably constrained in practice, often leading to stress and fracture. Evidence has accumulated that the swelling-induced stress can be partially relieved by plastic flow, and that electrodes of small feature sizes can survive many cycles of lithiation and delithiation without fracture. Here we simulate a particle of an electrode subject to cyclic lithiation and delithiation. A recently developed theory of concurrent large swelling and finite-strain plasticity is used to co-evolve fields of stress, deformation, concentration of lithium, and chemical potential of lithium. We identify three types of behavior. When the yield strength is high and the charging rate is low, the entire particle deforms elastically in all cycles. When the yield strength is low and the charging rate is high, the particle (or part of it) undergoes cyclic plasticity. Under intermediate conditions, the particle exhibits the shakedown behavior: part of the particle flows plastically in a certain number of initial cycles, and then the entire particle remains elastic in subsequent cycles. We discuss the effect of the three types of behavior on the capacity and the electrochemical efficiency. 2013 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes

Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manu...

متن کامل

Improved Mechanical and Electrochemical Properties of Artificial Graphite Anode Using Water-Based Binders in Lithium-Ion Batteries

In recent years, many studies have focused on the active materials of anodes to improve the performance of LIBs, while limited attention has been given to polymer binders, which act as inactive ingredients. However, polymer binders have amazing influence on the electrochemical performance of anodes. Herein, to investigate the binding performance between MCMB artificial graphite and the copper c...

متن کامل

Electrochemical Evaluation of PbO Nanoparticles as Anode for Lithium Ion Batteries (Technical Note)

PbO nanoparticles were synthesized using hydrothermal process. Scanning electron microscopy (SEM) was used in order to investigate of PbO powders. X-ray diffraction (XRD) pattern confirmed β-PbO formation during this process. The crystallite size of the powders was calculated using Scherrer formula about 74.6 nm. Electrochemical evaluation of the PbO nanoparticles as anode for Li-ion batteries ...

متن کامل

Electrode Materials for Lithium Ion Batteries: A Review

Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...

متن کامل

Enhanced wettability and electrolyte uptake of coated commercial polypropylene separators with inorganic nanopowders for application in lithium-ion battery

In this research, inorganic material type and content influence on coating of commercially available polypropylene (PP) separator were studied for improving its performance and safety as lithium ion battery separator. Heat-resistant nanopowders of Al2O3, SiO2 and ZrO2 were coated using polyvinylidene fluoride (PVDF) binder. Coating effects on the separators morphology, wettability, high tempera...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013