Coating - Substrate Systems for Thermomechanically Durable Turbine
نویسندگان
چکیده
The public reporting burden lor this collodion ol mlormalion is estimated lo overage 1 hour per response, including the time (or reviewing mslruclions, searching existing dala sources, gathering and maintaining the dala needed, fend completing and reviewing the colleclion ol mlormalion Send comments regarding this burden eslimate or any olhor aspect ol this collodion ol mlormalion, including suggestions lor reducing the burden, lo Department ol Defense, Washington Headquarters Services. Directorate lor tnlormalion Operations and Reports (0/04 0188), 1215 Jcllorson Davis Highway, Suite 1204, Arlington, VA 22202 4302 Respondents should be aware that notwithstanding any other provision ol law. no person shall be subject lo any penally lor tailing lo comply with a collection ol information il il does not display a currently valid OMB conlrol number PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS, 1. REPORT DATE (VJW-MM-yyyYj 06/30/2015 2. REPORT TYPE Final Technical Report 4. TITLE AND SUBTITLE Coating Substrate Systems for Thermomechanically Durable Turbine Airfoils
منابع مشابه
Novel Thermal Barrier Coatings Produced by Axial Suspension Plasma Spray
Ceramic Thermal Barrier Coatings (TBCs) on superalloy components are being used successfully in land-based gas turbine and aircraft engines. These coatings are generally made by either air plasma spraying (APS) or electron beam physical vapour deposition (EB-PVD). In general, EB-PVD TBCs have superior durability due to the columnar structure, but they are very expensive compared to APS TBCs. EB...
متن کاملThermal Shock and Oxidation Behavior of HiPIMS TiAlN Coatings Grown on Ti-48Al-2Cr-2Nb Intermetallic Alloy
A High Power Impulse Magnetron Sputtering (HiPIMS) method for depositing TiAlN environmental barrier coatings on the surface of Ti-48Al-2Cr-2Nb alloy was developed in view of their exploitation in turbine engines. Three differently engineered TiAlN films were processed and their performance compared. Bare intermetallic alloy coupons and coated specimens were submitted to thermal cycling under o...
متن کاملOn the Material Characterisation of Wind Turbine Blade Coatings: The Effect of Interphase Coating–Laminate Adhesion on Rain Erosion Performance
Rain erosion damage, caused by repeated droplet impact on wind turbine blades, is a major cause for concern, even more so at offshore locations with larger blades and higher tip speeds. Due to the negative economic influence of blade erosion, all wind turbine Original Equipment Manufacturers (OEMs) are actively seeking solutions. In most cases, since the surface coating plays a decisive role in...
متن کاملQuantitative Thermal Diffusivity Imaging of Disbonds in Thermal Protective Coatings Using Inductive Heating D
Problems of adherence of thermal protective coatings to aerospace structures have become important with their use on vehicles such as the space shuttle and for jet engine turbine blades. In these structures a dielectric coating which acts as a thermal barrier. is bonded to a conductive substrate. Failure of these coatings to adhere to the substrate can result in catastrophic failure of the vehi...
متن کاملFabrication and investigation of a transparent and flexible loudspeaker and microphone based on carbon nanotube
Transparent acoustic sensors and actuators are a new generation of acoustic transducers that can create an evolution in the microphone and loudspeakers industries. These transducers with properties like transparency, flexibility, flatness, very low weight and thickness have a great potential for various applications like public speakers, active noise cancelation systems, displays, cell phones a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015