The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides**

[*] T. Schmoelzer, Dr. S. Mayer, Prof. Dr. H. Clemens Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, 8700 Leoben, (Austria) E-mail: [email protected] Dr. K.-D. Liss Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW 2232, (Australia) Dr. P. Staron Institute of Materials Research, Helmholtz-Zentrum Geesthacht, 21502 Geesthacht, (Germany) [**] The support of the DESY and ESRF managements and user offices is gratefully acknowledged. We appreciate the commitment of the HZG and ESRF beamline staff which contributed greatly to the success of the experiments performed. Research activities performed at DESY have received funding from the European Community’s Seventh Framework Programme (FP7/ 2007-2013) under grant agreement n8226716. Intermetallic g-TiAl based alloys are a novel class of lightweight structural materials that exhibit excellent high-temperature strength while having low density. These properties make them ideal candidates for replacing dense Ni base alloys currently used in the temperature range from 550 to 750 8C. Therefore, extensive research activities were conducted during the last 20 years to make this innovative class of materials fit for service. In this task, diffraction methods have been an important tool for promoting the development of TiAl alloys. The ability to perform experiments in situ and to determine phase fractions even in cases where two phases are present in ultrafine lamellar structures are only two examples for applications in which diffraction methods are indispensable. In this work, a review is given concerning the use of diffraction methods in the development of TiAl alloys. Different methods are introduced and highlighted by examples. This review lists the advantages of diffraction experiments and critically discusses the limits of the individual methods.