Effective Flow And Force Areas Of Discharge Valve In A Rotary Compressor
نویسندگان
چکیده
In this paper, two fluid–structure interaction (FSI) models of the discharge valve are presented to study the effect of partly covering the discharge port by the cylinder and the roller on the effective flow and force areas. One is the full FSI model and another is the simplified FSI model in which the discharge port is not covered and the cylinder shape is simplified to be cylindrical. The pressure in the compression chamber, the displacement of the valve reed, the volumetric flow rate through the valve and the gas force acting on the valve reed head are obtained by the two FSI model. The results comparison between the two FSI models shows the effective flow and force area in the full FSI model are much different from those in the simplified FSI model. The factors which affect the covering area of the discharge port must be taken into consideration in the calculations of these two areas.
منابع مشابه
Prediction of the Valve Stresses of Rotary Compressor Using the Finite Element Method
In this study we analyzed both bending and impact stress of the discharge valve of the rotary compressor using a commercial FEM program MSC/NASTRAN and predicted the amount of maximum stress and the location it occurred. We measured the maximum stress of the valve in bolt case compressor using the resistance type strain gages. Good agreement was made by the comparison between the numerical anal...
متن کاملA Study on the Performance Improvement of a Rotary Compressor
Of many elements influencing the performance of a rotary compressor, the valve system plays an important role. In order to evaluate the performance, some basic experimental studies were made on the discharge coefficients and the proper dimensions of the valve system. Also, since the valve systems have previously been swdied by using rather simplified models, some effort' were made in this study...
متن کاملDynamic Analysis of the Discharge Valve of the Rotary Compressor
Discharge valve is very critical component in rotary compressor, and it is a reed valve which consists of valve seat, valve slice and retainer. The motion characteristics of valve slice greatly influence the flowing loss and life of valve. The paper presents a mathematical model to simulate thermodynamic process and motion of the valve simultaneously. Based on the thin-plate theory, the finite ...
متن کاملNoise Reduction of Rolling Piston Type Rotary Compressor
This paper refers to the noise reduction of the rolling piston type rotary compressor. In general. as the rolling piston increases its speed under the high compression ratio condition. the noise level increases steeply. We resume that this happens because a certain shock wave is produced in the comPression space. Then we could simulate the Phenomenon by the numerical analysis ( CACE method ) of...
متن کاملAn Investigation on Reciprocating and Rotary Refrigeration Compressors
Besides reciprocating compressors which are the traditional working machines in refrigeration cycles a growing number of different types of rotary compressors is used especially for air conditioning purposes. In an experimental investigation various reciprocating and rotary compressors were ana lysed concerning their thermodynamic and mechanical losses. The compressors investigated are all near...
متن کامل