Low repetition rate high energy 1.5 µm fiber laser.
نویسندگان
چکیده
In this paper, we report, for the first time, that by modulating pump beam to suppress ASE effect we realized ultra-low repetition rate output in an all fiber based Er:Yb codoped master oscillator power amplifiers (MOPA) system. Combined with pulse shaping technology, pulses with up to 205 µJ pulse energy and 200 ns pulse duration were obtained at Hz level.
منابع مشابه
2 µm femtosecond fiber laser at low repetition rate and high pulse energy.
In the paper, a 2 µm high energy fs fiber laser is presented based on Tm doped fiber at a low repetition rate. The seed laser was designed to generate pulse train at 2 µm at a pulse repetition rate of 2.5 MHz. The low repetition rate seed oscillator eliminated extra devices such as AO pulse picker. Two-stage fiber amplifier was used to boost pulse energy to 0.65 µJ with chirped pulse amplificat...
متن کاملHigh pulse energy 2 µm femtosecond fiber laser.
In the paper, a 2 µm high energy fs fiber laser and amplification system is presented based on Tm doped fibers. The seed laser was designed to generate pulse train at 2024 nm at a repetition rate of 2.5 MHz. An AOM was used as a pulse picker to further lower the repetition rate down to 100 kHz. Two-stage fiber pre-amplifiers and a high energy large mode area (LMA) fiber amplifier were used to b...
متن کاملHigh energy 3 µm ultrafast pulsed fiber laser.
In the paper, a 3 µm mid-infrared (MIR) high energy ultrafast Er:ZBLAN fiber laser and amplification system is presented. The 3µm seed pulses were generated through an Yb-doped ultrafast fiber laser pumped optical parametric amplification (OPA). A pulse energy of 12.4 µJ is generated at a repetition rate of 100 kHz with a pulse duration of 103 fs. A Er:ZBLAN fiber amplifier was used to further ...
متن کاملA 5-mm piezo-scanning fiber device for high speed ultrafast laser microsurgery.
Towards developing precise microsurgery tools for the clinic, we previously developed image-guided miniaturized devices using low repetition rate amplified ultrafast lasers for surgery. To improve the speed of tissue removal while reducing device diameter, here we present a new 5-mm diameter device that delivers high-repetition rate laser pulses for high speed ultrafast laser microsurgery. The ...
متن کاملSub-100 fs mode-locked erbium-doped fiber laser using a 45°-tilted fiber grating.
We demonstrate generation of sub-100 fs pulses at 1.5 µm in a mode-locked erbium-doped fiber laser using a 45°-tilted fiber grating element. The laser features a genuine all-fiber configuration. Based on the unique polarization properties of the 45°-tilted fiber grating, we managed to produce sub-100 fs laser pulses through proper dispersion management. To the best of our knowledge, this is the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 19 19 شماره
صفحات -
تاریخ انتشار 2011