Prediction of Weld Bead Parameters, Transient Temperature Distribution & Haz Width of Submerged Arc Welded Structural Steel Plates
نویسندگان
چکیده
Original scientific paper In a submerged arc welding process, the concept of temperature distribution is essential in order to control the HAZ (heat-affected zone) dimensions and get the required bead size and quality. In this paper, an analytical solution for moving heat source with Gaussian distribution of inside volume of central conicoidal shape is derived. Heat transfer in welded plates during welding is assumed to be the conductive heat transfer of a semi infinite body. With the help of this analytical solution, the transient temperature distribution, the HAZ width, the weld bead dimensions are estimated. Good compatibility between predicted and experimental values is achieved.
منابع مشابه
Numerical Analysis of Heat Transfer of Arc Welded Plate
In submerged arc welding process, the understanding of temperature distribution is essential in order to control the dimension of heat affected zone and to get the required weld bead shape and size etc. Moreover, the temperature profile is required to estimate the stress distribution in thermo mechanical analysis of the process. In this work, a numerical solution for moving heat source with Gau...
متن کاملPrediction of Weld Bead Geometry in Chromium-Manganese Stainless Steel Gas Tungsten Arc Welded Plates Using Artificial Neural Networks
The quality of the weld joint is highly influenced by the welding parameters. Hence accurate prediction of weld bead parameters is highly essential to achieve good quality joint. This paper presents development of neural network models for predicting bead parameters such as depth of penetration, bead width and depth to width ratio for AISI 202 grade stainless steel GTAW plates. The use of this ...
متن کاملPrediction of the Effect of Submerged Arc Welding Process Parameters on Weld Bead Width for MS 1018 Steel
The present investigation uses arc voltages, current, welding speed, wires feed rate and nozzle-to-plate distance as process parameters. Two level full factorial a technique has been used for experiment design. Multiple regression analysis has been used to develop a mathematical model to predict weld width using a single wire Submerged arc welding depositing bead-on-plate welds on 12mm plate. A...
متن کاملEffect of Mig Welding Input Process Parameters on Weld Bead Geometry on Hsla Steel
The various welding parameters such as welding speed, voltage and gas flow rate were varied on HSLA steel and the effects of these parameters on weld bead geometry such as penetration, width & height have been studied. Mathematical equations have been developed using factorial technique. And the result of various effects are shown in tables. (Numerical Values). INTRODUCTION Wide variety of stee...
متن کاملPrediction of the weld pool geometry of TIG arc welding by using fuzzy logic controller
The present paper describes fuzzy logic simulation of tungsten inert gas welding (TIG) process to predict the weldment macrostructure zones' shape profile characteristics. The prediction of the weld pool geometry together with the shape of the heat affected zone (HAZ) was accomplished taking into account of TIG welding process parameters such as arc traverse speed, welding current and arc lengt...
متن کامل