A High-Efficiency Isolated-Type Three-Port Bidirectional DC/DC Converter for Photovoltaic Systems
نویسندگان
چکیده
This paper proposes a novel high-efficiency isolated three-port bidirectional DC/DC device for photovoltaic (PV) systems. The device contains a high step-up converter for PV modules to supply power to the DC bus, and a bidirectional charge/discharge control circuit for the battery with an improved boost-flyback converter. When the PV modules supply sufficient energy, their output can be stepped up and energy supply to the DC bus and charging of the battery can be achieved simultaneously. However, when the energy supplied is insufficient, the battery provides energy to the DC bus. When the proposed converter is operated in the step-down mode, the DC-blocking capacitor on the high-voltage side is used to reduce the voltage on the transformer and achieve high step-down performance. Moreover, to improve the overall efficiency of the system, the energy stored in the leakage inductance is recycled and supplied to the DC-blocking capacitor during operation in the step-up mode. Finally, to verify the feasibility and practicability of the proposed devices, a 500 W three-port bidirectional DC/DC devices was implemented. The highest efficiencies achieved for operation in different modes were as follows: high step-up mode for the PV modules, 95.2%; battery step-up mode, 94.2%; and step-down mode, 97.6%.
منابع مشابه
A Multi-port High Step-up DC/DC Converter for Hybrid Renewable Energy Application
This paper presents a novel multi-port DC/DC converter which is suitable to be used as the interface of hybrid renewable energy systems. The converter contains three unidirectional power flow ports which two of them are input ports and are connected to two independent energy sources while the third one is the output port that feeds a standalone load. Furthermore, the proposed converter contains...
متن کاملارائه یک مبدل DC-DC دو طرفه چند درگاهه جدید با قابلیت کلیدزنی نرم و بررسی عملکرد مبدل برای استخراج حداکثر توان از آرایهی فتوولتائیک
In this paper, a non-isolated multi-port zero-voltage-switching bidirectional dc-dc converter is proposed. Free ripple condition of input currents is obtained by using coupled inductors in any stages. Proposed converter is analyzed as a five port converter. It is possible to increase number of input sources up to as a kind of port converter. The proposed converter can be used in both boost and ...
متن کاملA High-Efficiency Isolated LCLC Multi-Resonant Three-Port Bidirectional DC-DC Converter
In this paper, an isolated multi-resonant three-port bidirectional direct current-direct current (DC-DC) converter is proposed, which is composed of three full bridges, two inductor-capacitorinductor-capacitor (LCLC) multi-resonant tanks and a three-winding transformer. The phase shift control method is employed to manage the power transmission among three ports. Relying on the appropriate para...
متن کاملBidirectional Battery Charger for PV Using Interleaved Fourport DC-DC Converter
In this paper, a four-port bidirectional dc-dc converter is proposed for grid-interactive photovoltaic (PV) system application. The four-phase topology is suitable for residential pumping, aerospace power requirements. The control of battery and different capacities of PV modules are naturally decoupled. In addition, the port interface with PV is current type which can implement maximum power p...
متن کاملA Novel Topology for Controlling a Four Port DC-DC Boost Converter for a Hybrid PV/PV/Battery Power System
This paper proposes a four port three input-dc-dc boost converter for hybridising two photovoltaic systems and a storage medium. Three unidirectional ports are utilised to interface the converter with the two input sources and the output load. A bidirectional port interfaces the converter with the storage system. The two sources individually or simultaneously supply the load and charge the batt...
متن کامل