Diffusiophoresis of two-dimensional liquid droplets in a phase-separating system.
نویسندگان
چکیده
The motion of phase-separating liquid drops was simulated in two dimensions following the model H, where convection and diffusion are coupled via a body force, expressing the tendency of demixing systems to minimize their free energy. This driving force depends on the capillary number, i.e., the ratio of viscous to thermal forces, which in a typical case is of order 10(-4), inducing a convective material flux much larger than its diffusive counterpart. Three problems were considered. In the first, we studied the motion of a single drop immersed in a continuum field with constant concentration gradient, finding that the drop speed is proportional to the concentration gradient and inversely proportional to the capillary number. In the second problem, we found that the motion of a single drop immersed in a homogeneous concentration field depends on the difference (Delta(phi))(0) between the initial concentration of the continuum phase and its equilibrium value. In fact, when (Delta(phi))(0)<0, the drop shrinks without moving, while when (Delta(phi))(0)>0, the drop consumes material from the surrounding field and moves randomly, propelled by the induced capillary driving force. During its movement, the drop grows linearly in time, with a growth rate proportional to the ratio between molecular diffusivity and interface thickness. In addition, during its random motion, the drop mean square displacement grows linearly with time, with an effective diffusion coefficient which is of the same magnitude as the molecular diffusivity. The predicted drop growth rate and mean velocity are in good agreement with experimental observations. Finally, the motion of two drops is studied, showing that the capillary forces induce a mutual attraction between the two drops. When (Delta(phi))(0)<0, the attractive force is unchallenged, thus leading always to coalescence, while when (Delta(phi))(0)>0 a screening effect arises which may keep the two drops apart from each other.
منابع مشابه
Dynamic and Deformation of a liquid Droplet in a Convective Two-Dimensional Laminar Flow
The objective of this research is to develop an accurate numerical method to be used in showing the deformation of a liquid fuel droplet in a convective field. To simultaneously solve the internal liquid droplet flow field as well as the external gas phase flow field, a nonstaggered rectangular grid system without any coordinate transformation is used. Transition from the gas field to the liqui...
متن کاملDynamic and Deformation of a liquid Droplet in a Convective Two-Dimensional Laminar Flow
The objective of this research is to develop an accurate numerical method to be used in showing the deformation of a liquid fuel droplet in a convective field. To simultaneously solve the internal liquid droplet flow field as well as the external gas phase flow field, a nonstaggered rectangular grid system without any coordinate transformation is used. Transition from the gas field to the liqui...
متن کاملHydrodynamics of Sieve Tray Distillation Column Using CFD Simulation
Sieve trays are widely used in the gas- liquid contactors such as distillation and absorption towers. In this article, a three-dimensional, two phase CFD model using Euler-Euler framework was developed to simulate a distillation tower with two sieve trays. Hydrodynamic simulation of air and water system in different rates of gas phase was carried out and velocity distribution parameters, clear ...
متن کاملParametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere
The growth of a two-phase cloud of a liquid fuel in a stagnant atmosphere is studied using computational fluid dynamic techniques. In order to predict the danger and hazard of such cloud in open atmosphere it is very important to determine the fuel concentration in the cloud, especially in the far field region from the fuel reservoir. The results show that with omission of droplets break up...
متن کاملHydrodynamics of Sieve Tray Distillation Column Using CFD Simulation
Sieve trays are widely used in the gas- liquid contactors such as distillation and absorption towers. In this article, a three-dimensional, two phase CFD model using Euler-Euler framework was developed to simulate a distillation tower with two sieve trays. Hydrodynamic simulation of air and water system in different rates of gas phase was carried out and velocity distribution parameters, clear ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics
دوره 60 2 Pt B شماره
صفحات -
تاریخ انتشار 1999