Low contact resistivity of metals on nitrogen-doped cuprous oxide (Cu 2O) thin-films Citation

نویسندگان

  • Siah
  • Sin Cheng
  • Sin Cheng Siah
  • Yun Seog Lee
  • Yaron Segal
  • Tonio Buonassisi
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultra low-resistance palladium silicide Ohmic contacts to lightly doped n- InGaAs

Related Articles Fermi-level depinning at the metal-germanium interface by the formation of epitaxial nickel digermanide NiGe2 using pulsed laser anneal Appl. Phys. Lett. 101, 172103 (2012) Method for investigating threshold field of charge injection at electrode/dielectric interfaces by space charge observation Appl. Phys. Lett. 101, 172902 (2012) Low contact resistivity of metals on nitrogen-...

متن کامل

Realization of Cu-Doped p-Type ZnO Thin Films by Molecular Beam Epitaxy.

Cu-doped p-type ZnO films are grown on c-sapphire substrates by plasma-assisted molecular beam epitaxy. Photoluminescence (PL) experiments reveal a shallow acceptor state at 0.15 eV above the valence band edge. Hall effect results indicate that a growth condition window is found for the formation of p-type ZnO thin films, and the best conductivity is achieved with a high hole concentration of 1...

متن کامل

Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique

Graphene oxide (GO) thin films were simply deposited on fluorine doped tin oxide (FTO) substrate via a low-voltage electrodeposition. The GO and GO thin films were characterized by Zeta Potential, X-ray diffraction, Ultraviolet-Visible spectroscopy, atomic force microscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and energy dispersive X-ray spectrosc...

متن کامل

Ohmic Contact of Cu/Mo and Cu/Ti Thin Layers on Multi-Crystalline Silicon Substrates

Cu-Mo and Cu-Ti contact structures were fabricated on multi-crystalline silicon substrates to provide a low resistance ohmic contact. Deposition steps are done in an excellent vacuum chamber by means of electron beam evaporation and samples are then annealed for the realization of an efficient alloy layer. The effects of process parameters such as film thickness, annealing duration and temp...

متن کامل

A study on the dependence of DC electrical properties and nanostructure of Cu thin films on film thickness

This paper reports the correlation between film thickness, nanostructure and DC electrical properties of copper thin films deposited by PVD method on glass substrate. X-ray diffraction (XRD) and atomic force microscopy (AFM) were used for crystallography and morphology investigation, respectively. Resistivity was measured by four point probe instrument, while a Hall effects measurement system w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013