Steel–CFRP Composite (CFRP Laminate Sandwiched between Mild Steel Strips) and It-s Behavior as Stirrup in Beams

ثبت نشده
چکیده

In this present study, experimental work was conducted to study the effectiveness of newly innovated steel-CFRP composite (CFRP laminates sandwiched between two steel strips) as stirrups. A total numbers of eight concrete beams were tested under four point loads. Each beam measured 1600 mm long, 160mm width and 240 mm depth. The beams were reinforced with different shear reinforcements; one without stirrups, one with steel stirrups and six with different types and numbers of steel-CRFR stirrups. Test results indicated that the steel-CFRP stirrups had enhanced the shear strength capacity of beams. Moreover, the tests revealed that steelCFRP stirrups reached to their ultimate tensile strength unlike FRP stirrups which rupture at much lower level than their ultimate strength as werereported in various researches. Keywords—Steel-CFRP Composite, Stirrups, Concrete Beams, Shear Span.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Strengthening of Scaled Steel-Concrete Composite Girders and Steel Monopole Towers with CFRP

Cost-effective rehabilitation and/or strengthening of steel structures currently demanded by the telecommunications industry and transportation departments. Rehabilitation is often required due to crosssection losses resulting from corrosion damage and strengthening may be required due to changes in the use of a structure. Current strengthening techniques, have several disadvantages including t...

متن کامل

Experimental Investigations on U- and L-Shaped End Anchored CFRP Laminate Strengthened Reinforced Concrete Beams - Springer

Strengthening of reinforced concrete beams using externally bonded CFRP laminate is the most popular choice. However, premature end peeling of CFRP laminate has been shown to be the main weakness of this method. Development of high shear and normal stresses at the end of strengthening laminate is the key reason to cause end peeling which is not preventable by conventional anchoring system. This...

متن کامل

Fatigue and Overloading Behavior of Steel-Concrete Composite Flexural Members Strengthened with High Modulus CFRP Materials

Due to corrosion and the continuous demand to increase traffic loads, there is a need for an effective system which can be used to repair and/or strengthen steel bridges and structures. This paper describes an experimental program, recently completed, to investigate the fundamental behavior of steel-concrete composite scaled bridge beams strengthened with new high modulus carbon fiber reinforce...

متن کامل

Effect of Impact Load on the Bond between Steel and CFRP Laminate

Carbon fiber reinforced polymers strengthen steel structural elements. These structural elements are normally subjected to static, dynamic and fatigue loadings during their life-time. CFRP laminate is commonly used structures under the subjected loads. A number of focused on the characteristics of CFRP sheets members under static, dynamic and fatigue loadings. is a gap in understanding the bond...

متن کامل

Flexural Strengthening of Steel Bridges and Towers Using High Modulus CFRP Materials

Many steel structures are in need of strengthening due to reqUirements to increase carrying capacity and/or rehabili tation due to corrosion degradation. This paper summarizes the results of an investigation that has been conducted to evaluate the performance of carbon fiber reinforced polymer (CFRP) materials to increase the strength and stiffness of steel structures. Two types of specimens we...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013