Measurements of Heat Transfer Coefficients to Cylinders in Shallow Bubble Columns
نویسندگان
چکیده
High heat transfer coefficients and large interfacial areas make bubble columns ideal for dehumidification. However, the effect of geometry on the heat transfer coefficients outside cooling coils in shallow bubble columns, such as those used in multi-stage bubble column dehumidifiers, is poorly understood. The generallyoverlooked entry and coalescing regions become important in shallow bubble columns, and there is disagreement on the effects of the coil and column diameters. In this paper, a method is presented for measuring the heat transfer coefficient between coil and liquid in a shallow bubble column. Horizontal cylindrical probes are used to measure the heat transfer coefficient over a range of gas velocities. The liquid depth and the diameter, height, and horizontal position of the cylinder are also varied. Existing correlations for tall columns tend to underpredict the heat transfer coefficient and do not account for all effects of geometry. The highest heat transfer coefficients (above 8000 W/m2-K) are recorded on cylinders placed 4 cm high. No significant effect of cylinder diameter is observed. Based on the results, recommendations are made regarding bubble column dehumidifier design.
منابع مشابه
Investigation of Heat Transfer Parameters of a Bundle of Heaters in a Simple Bubble Column Reactor Using CFD Method
Bubble columns are gas- liquid contactors that are widely used in chemical and bio- chemical industries. High mixing that result in high heat and mass transfer rates are amongst their advantages. Heat transfer in a bubble column having a bundle of heaters investigated and the variation of heat transfer coefficient with variation in heaters pitch to diameter ratios in a bundle of heaters reporte...
متن کاملNumerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders
A numerical study has been carried out for slot air jet impingement cooling of horizontal concentric circular cylinders. The slot air jet is situated at the symmetry line of a horizontal cylinder along the gravity vector and impinges on the bottom of the outer cylinder which is designated as θ=0°. The outer cylinder is partially opened at the top with a width of W=30mm and is kept at constant t...
متن کاملLocal Heat Transfer Coefficients in a Rectangular Duct with Plate Blockages of Variable Stream Wise Spacing
An experimental investigation is conducted to determine the effect of repeated-plate blockages of variable streamwise spacing on heat transfer characteristics of turbulent flow in rectangular ducts. The plates are attached to the upper and lower walls in a staggered arrangement. The experiments are carried out by mass transfer and the analogy between heat and mass transfer provides the necessar...
متن کاملHeat Transfer Coefficients in Three – Phase Sparged Reactors: A Unified Correlation
Three – Phase Sparged Reactors are widely used in Chemical, Bio-Chemical and Petrochemical Industrial processes. The advantages of these reactors include high mass and heat transfer rates,isothermal conditions and on-line catalyst addition and withdrawl. The high heat transfer rates of Three-Phase Sparged Reactors are particularly attractive for highly exothermic reactions where substantial red...
متن کاملMechanism and Prevention of Scale Formation in Boilers
Nucleate boiling heat transfer coefficients may be strongly reduced by scale formation, even for conditions where the bulk foulant concentration is well below the saturation concentration. Due to the mechanism of micro-layer evaporation, the local concentration at the heat transfer surface can be considerably increased, causing the formation of scale and changes in bubble frequency and bubble d...
متن کامل